Catalogs >
Bermad C.S >
S-392T-3W

S-392T-3W
2Pages

Catalog excerpts

Latching Solenoids MAGNETIC, LATCH SOLENOID with Hydraulic Base Model S-392T-3W The BERMAD Model S-392T-3W is a compact 3-Way Latching Solenoid pilot valve comprised of two main components: a solenoid and a 3-way hydraulic pilot valve. The BERMAD latching solenoid can control valves independently or in combination with other control circuit accessories. Model S-392T-3W consumes power only when switching positions, using a very short electric pulse. This prolongs life of batteries and enables solar recharging. The hydraulic base features a three position TRIO manual override and includes a bracket for attaching to the valve or to a solenoid manifold. Features & Benefits ■ Advanced Construction Materials, Unique Plastic Casing ■ Proven pressure, voltage and weather resistance ■ Highly durable in corrosive environments ■ Protection Class- IP68; NEMA Type 6D ■ Superb Internal Design and Finish ■ Reliable operation under dirt loaded water ■ Short Electrical Pulse Latch Activation ■ Extremely low power consumption ■ Low voltage battery operation ■ Saves wires and infrastructures ■ No coil heating ■ Suites most Battery Operated Controllers on the market ■ Applicable in solar activated systems ■ Hydraulic Base with Installation Bracket ■ High flow capacity quickens valve response ■ No dirt sedimentation inside solenoid actuator ■ 3 position TRIO manual override (OPEN, AUTO and Close) ■ Simple installation to valve or manifold ■ Reliable and Durable Product that Carries the Stamp of BERMAD Quality Typical Applications ■ Systems distanced from control center ■ Unavailable power supply locations ■ Solenoid controlled on/off valves ■ Solenoid controlled pressure and flow control valves ■ Multiple valve systems ■ Solenoid manifolds in irrigation heads ■ Distribution Centers ■ Energ

Open the catalog to page 1

Specifications Base Ports: A" NPT 1 - Vent C - Valve Control Chamber Actuator Port (Pressure) - Vs" NPT Valve Anchoring: By Screws (Self Tapping #8) at the Solenoid base Leads: 2 leads x 0.32 mm2 x 80 cm Operation Modes (electrical connections) +Red & - Black: Solenoid vents +Black & - Red: Solenoid pressurizes Operating Pressure Range: 0-10 bar Base Orifice Diameter: 2.0 mm Actuator Orifice Diameter: 1.6 mm Base Flow Factor: Kv = 0.08 m3/h @ 1 bar DP; Cv = 0.09 GPM @1 psi DP Actuator Hydraulic Base Trio Materials: Actuator Casing: Nylon Seals: NBR Wetted parts: Stainless Steel Base: Nylon...

Open the catalog to page 2