BIGTOOLRACK ® MANUAL READ VERY IMPORTANT We have done the work for you! Your New YardRack has been fully assembled. If you have questions or want to add more accessories to your YardRack please visit us at https://www.bigtoolrack.com If you have any missing or damaged parts contact us right away via email at [email protected]. Please refer to Parts Breakdown on Page 12 for our part designations Thank you for your business! We know you are going to love your New YardRack!

WARNING: Please reference your vehicles operators' manual for complete operational details and take the necessary precautions, as with any attachment, to avoid machinery instability issues. WARNING: To avoid tip over and stability issues, please operate with consideration of weight and height of the load earned and make sure that heavy loads are earned as low as possible.

Unboxing Your new YardRack comes in the box fully assembled. 1x 1x 1x 2x 2x 2x 2x 1x YardRack Basket Assembly (folded) Hitch Assembly L-Tube M8x25mm Bolt, Washer & Nut set Square Washer M10x60mm High Strength Hex Flange Bolt M10 Locking Nut #9 or 11/32 Drill Bit (size depending on your location, both sizes will work) YardRack Basket Assembly (x1) M10x60mm High Strength Hex Flange Bolt (x2)

• 1x 12 mm socket and/or wrench • 1x 13 mm socket and/or wrench • 1x 14 mm socket and/or wrench • 1x 17 mm socket and/or wrench

Installation Step 1 - Attach the Hitch Assembly to your tractor. • Pick from the four sets of slots that best match the pre-drilled holes on your tractor’s mounting surface, ideally the hitch assembly should be centered. (slightly off center is ok and may be necessary for some models) Attach the Hitch Assembly to your tractor’s mounting surface with the Square Washers and the M8 x 25 bolt, washer & nut set as shown. The mounting surface (the tractors back plate) should be captured between the back surface of the hitch assembly and the two Square Washers. If there are no pre-drilled holes, we’ve...

Step 2 - Attach Basket Assembly to L-Tube Attach the Basket Assembly to the L-Tube as shown in the image using two M10 x 60mm Hex Flange Bolts and two M10 Locking Nuts as shown  Use 14mm Wrench/Socket for the M10 x 60mm Hex Flange Bolt

Step 3 - Attach Basket Assembly with L-Tube to the Hitch Assembly Attach assembled YardRack Basket and L-Tube assembly to the hitch. Insert the 5/8 Hitch Pin to connect the L-Tube to the Hitch and install the clip  Use 14mm Wrench/Socket for the M10 x 20mm Hex Flange Stabilizing Bolt (Optional) M10 x 20mm Hex Flange Stabilizing Bolt (x1) (Optional)

Final Assembly

BTR UNIVERSAL DROP DOWN HOLDER x1 6. BHC-031 CLAMP, VIBRATION DAMPENING x2 7. BTR-420 BTR YARDRACK BASKET ASSEMBLY x1 8. BTR-412 LANYARD, WIRE ROPE x2 9. BTR-UTH-1 BTR UNIVERSAL TOOL HOLDER x1

The Manufacturer, warrants its new, unused, Equipment to be free of defects in material and workmanship at time of the delivery to the first retail purchaser according to the Manufacturer Warranty Policy. 1) BASIC WARRANTY REPAIR PERIOD AND REMEDIES a) Manufacturer will repair or replace, at its option, without charge for parts or labour, any defective part of the equipment for a period of twelve (12) months from delivery to the first retail purchaser. b) Any parts that are covered by an Extended Warranty published by Manufacturer, are an exception to the Basic Policy, and are to be warranted...

LEGAL DISCLAIMER BTR LLC. reserves the right to change the stated specifications and technical information without notice and BTR LLC. does not represent or warrant that the information in this publication is completely accurate or current; however BTR LLC. used reasonable efforts to set forth and include accurate and up to date information in this publication. BTR LLC. disclaims all representations and warranties, whether express or implied, including but not limited to warranties of merchantability and fitness for a particular purpose and BTR LLC. shall not be liable for any damages, whether...