SR3000 V2
2Pages

The SR 3000 V2 is a Stationary Reader for ISO 11784/11785 transponders with exceptionally good RFID performance. It comes with a range of panel antennas and can read and control two inputs and outputs. It is designed for easy integration by OEM’s and System Integrators. Dedicated RFID processor Improvements SR3000 V2 compared to SR3000 (V1) Improved auto-tuning accuracy for optimum antenna voltage Antenna Auto tuning Significantly improved ISO FDX-B and HDX reading performance Larger Power Supply range (11-30 VDC) Enhanced features The SR3000 V2 is pinand software compatible with the SR3000 (V1) High conducting antenna connection Designed for easy integration by OEM’s and System Integrators The SR 3000 V2 replaces the powerful SR 3000 (V1). Just like the V1, the V2 is equipped with standardized computer interface to suit both RS232 interface with a PC or other serial device, as well as addressable interface on a RS485 field bus. The 2 inputs are equipped with pull-up resistors and can be used e.g. for detecting a gate switch or photo cell. The 2 solid state outputs can be used e.g. to operate relays or actuators. A simple communication protocol sets and reads the I/O’s and can also switch on/off the HF-field. The integrated auto-tuning warrants optimum identification in dynamic environments, even when the antenna environment changes due to (unexpected) external circumstances. The DSP-algorithm is fine-tuned for optimum RFID performance with both FDX-B and HDX transponders. The DSP-software can be (re)loaded from a PC to embed latest RFID and noise cancellation algorithms. Reads HDX and FDX-B transponder according to ISO 11784/11785 DSP processor for enhanced RFID performance Antenna automatically (re-)tunes to compensate changes in antenna environment SA SR 3000 antenna’s designed for permanent outdoor installation. Install protected from direct rain ingression and sunlight Power Supply and dimensions Power Supply RS485 Master/Slave synchronization (galvanic isolation) 2 inputs (1k pull-up resistor) 2 outputs (12V, 1.0A per output) SR 3000 V2 fit for 12V car battery Power Supply * Use PS SR3000 for verifiable RFID performance! ** When 2 outputs switched-off BB 13001 SR 3000 V2/1. Specification may be changed without prior notice. BioControl AS, Grimstad Gård, N-1890 Rakkestad, Norway — T: +47 6922 5255 — F: +47 6922 3810 — info@biocontrol.no

STATIONARY READER Single Reader configuration Multiple Reader configuration Max. length first-last node = 1,000 m RS485 Master/Slave synchronization, max. length first-last node = 200 m. Master/Slave sync. twisted pair shielded cable 7P65 housing with sufficient cable inlets Cable inlets included and pre-mounted BB 13001 SR 3000 V2/2. Specification may be changed without prior notice. BioControl AS, Grimstad Gard, N-1890 Rakkestad, Norway — T: +47 6922 5255 — F: +47 6922 3810 — info@biocontrol.no —