BLS SRL via dei Giovi, 41 20032 Cormano (MI) - Italy t/f +39 0239310212 / 0266200473 [email protected] - www.blsgroup.com BLS Oxi 2.0 half mask has been designed as a passive device to supply the oxygen during hyperbaric oxygen therapy. It is made of non-toxic and nonallergenic materials. Half mask with silicon facepiece, which covers mouth and nose, and is equipped with: • an adaptor, placed on the left or right, that can rotate 360° allowing to connect the half mask to an oxygen supply tube in the most comfortable position for the patient; • a central point from which to extract and test the oxygen inside the mask; • an adaptor, placed on the left or right, for the air to come out. They need to be done with particular care using a neutral detergent and water not warmer than 40°C. Clean all the removable parts with a little soft brush. FLAMMABILITY All components are self-extinguishing and meet the requirements of the standards.

BLS SRL via dei Giovi, 41 20032 Cormano (MI) - Italy t/f +39 0239310212 / 0266200473 [email protected] - www.blsgroup.com BLS Oxi 2.0HALF MASK FOR OXYGEN THERAPY IN HYPERBARIC CHAMBER MATERIALS STORAGE FACE SEAL HARNESS HEAD PIECE HARNESS HOLDER BUCKLES Singularly packed and contained in a cardboard box TRANSPORT MODEL CODE WEIGHT (g) Q.TY/BOX Q.TY/CARTON IMPORTANT BLS declines any responsibility, direct or indirect, from any misuse of both devices and instructions. User is responsible for the determination of product compliance with the intended use.