Excavators Specifications Working Range Operating weight with cab and bucket (ISO 6016) Transport mass (no attachment) Weight reduction with canopy Additional weight for long dipperstick Additional weight for counterweight Ground pressure with rubber tracks Engine Make / model Fuel Number of cylinders Displacement Maximum power @ 2500 rpm (ISO 14396) Maximum torque (SAE) Kubota / D722-E4B (Stage V) Diesel 3 719 cm3 10.2 kW 43.5 Nm Hydraulic System Pump type Pump capacity Piston pump capacity Auxiliary (AUX1) flow Auxiliary (AUX2) flow Auxiliary (AUX1) relief Auxiliary (AUX2) relief Dual piston pump with gear pump 41.30 L/min 30.00 L/min 30.00 L/min 15.00 L/min 180.00 bar 179.00 bar Performance Digging force, dipperstick (ISO 6015) Digging force, long dipperstick (ISO 6015) Digging force, bucket (ISO 6015) Drawbar pull Travel speed, low range Travel speed, high range Values marked with * - Long dipperstick Slew System Boom swing, left Boom swing, right Slew rate Fluid Capacities Fuel reservoir Hydraulic reservoir Environmental Noise level LpA(EU Directive 2006/42/EC) Noise level LWA(EU Directive 2000/14/EC) Whole body vibration (ISO 2631–1) Hand-arm vibration (ISO 5349–1) Standard Features 230 mm rubber track 980 mm dozer blade with two 190 mm blade extensions Battery disconnect switch Control console locks Cupholders Double acting auxiliary hydraulics with quick couplers Engine monitor with auto shutdown Exposed counterweight with 4 mm steel tailgate Foldable and ergonomic travel pedals Full fuel warning alarm Grease gun holder Horn Hydraulic and travel control lockout Hydraulic joystick controls Hydraulically retractable undercarriage from 1360 mm to 980 mm Retractable seat belt Storage compartment TOPS/ROPS/FOPS canopy 1 Two-speed travel Upper structure four point tie down Water separator Work light (boom) Warranty: 24 months, 2000 hours (whichever occurs first) 1. Roll Over Protective Structure (ROPS) – Meets requirements of ISO 3471. Tip Over Protective Structure (TOPS) – Meets requirements of ISO 12117. Falling Object Protective Structure (FOPS) - Meets requirements of ISO 3449. Options Demolition package (boom, arm, bucket cylinder covers & HD travel hoses guard) Object handling package (Valves, OWD, Lifteye) TOPS/ROPS/FOPS cab w/ heater Long dipperstick w/ clamp eyes Long dozer blade AUX1 direct return to tank AUX2 hydraulics AUX1/AUX2 on arm Keyless ignition Travel motion alarm AM/FM MP3 radio B4PK 11001 — B4PK 99999 • 2021-9-13 • ©2021 Bobcat EMEA - www.bobcat.com/eu Specifications are subject to change without notice - Pictures of Bobcat units may show other than standard equipment Additional halogen lights LED lights set Beacon Special Application kit L/R mirrors Fire extinguisher Hydraulic clamp Klac C and MS01 couplers Comfort package (Superior seat for canopy or Cloth susp. seat for cab, Autospeed shift, Aux and Off-set pilot control) Performance package (HD travel motors, add.