Specifications Overview
The TR50-180 V Rotary Telescopic Handler is a high-performance machine designed for heavy lifting and precise handling. It features a rated capacity of 4,999 kg at a 500 mm load center and can reach a maximum lifting height of 18 meters with stabilizers fully extended. The capacity at maximum height is 3,000 kg, and it offers continuous 360° turret rotation. The machine can achieve a maximum speed of 40 km/h.

Stabilizers
The handler is equipped with pivoting stabilizers and a stabilization system that includes ground pressure detection and automatic leveling.

Weights and Engine
The unladen weight of the machine is 15,100 kg. It is powered by a DEUTZ TCD 3.6 L4 engine, compliant with Stage V standards, delivering 100 kW (134 hp) at 2,200 rpm and a maximum torque of 500 Nm at 1,600 rpm.

Hydraulic System
The hydraulic system features a load-sensing pump with a capacity of 105 L/min and a relief valve pressure setting of 350 bar. The control valve for the boom and turret is electro-proportional with flow sharing.

Drive System
The handler uses a hydrostatic transmission with electronic regulation and 4-wheel drive. It includes an electronically controlled variable displacement pump and motor, with a 2-speed gearbox.

Traction and Axles
Standard tires are 445/65 R22.5, with a towing force of 72 kN and a gradeability of 48%. The axles are oil-immersed with planetary gears, and both front and rear axles are oscillating and steering, with hydraulic locking on the rear axle.

Brakes and Steering
The service brake is hydraulically operated with wet multi-disk brakes on each axle, and the parking brake is hydraulic with negative action. The steering system offers three modes: 2-wheel, 4-wheel, and crab-steer, with semi-automatic wheel realignment.

Fluid Capacities
The fuel tank capacity is 175 L, AdBlue is 10 L, and the hydraulic reservoir holds 165 L.

Environmental and Standards
The operator noise level is 72 dB(A), with an acoustic power level of 106 dB(A). Whole body vibration is measured at 0.49 ms-2, and hand-arm vibration at 0.57 ms-2. The machine complies with standards EN 1459-2, EN 13000, EN 280, and EU 2016/1628 for engine emissions.