Specifications Overview
The TR60-350 V Rotary Telescopic Handler is a high-performance machine designed for heavy lifting and versatile operations. It features a rated capacity of 6,000 kg at a 600 mm load center and a maximum lifting height of 35 meters with fully extended stabilisers. The machine can rotate its turret continuously at 360° and reach a maximum speed of 40 km/h.

Stabilisers
The handler is equipped with telescopic scissors-type stabilisers that include a ground pressure detection system, automatic levelling, and lifting capacity adjustments based on stabiliser extension.

Weights and Engine
The unladen weight of the machine is 24,000 kg. It is powered by a Volvo TAD 582 VE engine compliant with Stage V standards, delivering 175 kW (238 hp) at 2,300 rpm and a maximum torque of 925 Nm at 1,380 rpm.

Hydraulic System
The hydraulic system features a load-sensing pump with a capacity of 124 L/min and a relief valve pressure setting of 350 bar. The control valve for the boom and turret is electro-proportional with flow sharing.

Drive System
The handler uses a hydrostatic transmission with electronic regulation and 4-wheel drive. It includes an electronically controlled variable displacement pump and motor, with a 2-speed gearbox.

Traction and Axles
Standard tyres are 445/65 R22.5, with a towing force of 152 kN and a gradeability of 65%. The axles are oil-immersed with planetary gears, and both front and rear axles are oscillating and steering, with hydraulic locking and levelling capabilities.

Brakes and Steering
The service brake system consists of hydraulically operated wet multi-disk brakes on each axle, while the parking brake is hydraulic with negative action. The steering system offers three modes: 2-wheel, 4-wheel, and crab-steer, with semi-automatic wheel realignment.

Fluid Capacities
The fuel tank holds 270 L, the AdBlue tank 40 L, and the hydraulic reservoir 195 L.

Environmental and Standards
The operator noise level is 72 dB(A), with an acoustic power level of 108 dB(A). Whole body vibration is measured at 0.58 ms-2, and hand-arm vibration at 0.85 ms-2. The machine complies with standards EN 1459-2, EN 13000, EN 280, and EU 2016/1628 for engine emissions.

Load Chart and Dimensions
Detailed load charts and dimensions are provided to ensure safe and efficient operation.