Side Loading Devices - Datasheet

Product catalog summary

Overview: The document provides technical specifications and operational details for the Boschi CL1 and CL2 side loading devices designed for use with the Boschi IM9 grain bagger. These devices facilitate the loading of grain baggers directly from conventional transport vehicles, enhancing efficiency with a lower investment.

Specifications:

Drive System: Protected PTO shaft with a minimum tractor power requirement of 44 kW (60 hp) and a PTO shaft speed of 540 r.p.m.
Horizontal Silo Size: Diameter of 9 feet (2.74 meters).
Product Compatibility: Suitable for any type of grain.
Brake System: Hydraulic disk brakes adjustable by hand pump.
Capacity: More than 200 tons per hour.
Total Weight: 1,070 kg (device only).
Side Loading Auger: Diameter of 450 mm.

Hydraulic System and Components:

The hydraulic system includes an idler assembly, hydraulic pump gearing-up, oil tank, filter, thermometer, pipe fittings, and connection pipes.
The side loading auger is reinforced and includes a hydraulic radial engine, unloading hopper, pipes, fittings, and transportation wheels.
The side loading hopper is available in various types to ensure maximum compatibility.

Device Requirements:

Boschi CL1: Requires a vehicle with rear unloading fitted with an unloading opening.
Boschi CL2: Requires a vehicle with rear unloading and allows the use of the entire tailboard width.

Conclusion: The Boschi CL1 and CL2 devices are designed to enhance the efficiency of grain bagging operations by allowing direct loading from transport vehicles, thus optimizing the use of the Boschi IM9 bagger with minimal additional investment.

Catalog excerpts

Stoccaggio cereali in silos orizzontali Storage of cereals in horizontal silos Lagerung von Getreide in Folienschläuchen Boschi CL1 - Boschi CL2 DISPOSITIVI DI CARICO LATERALE PER INSACCATRICI CEREALI SIDE LOADING DEVICES FOR GRAIN BAGGER MOBILE FÖRDERSCHNECKE FÜR DAS SEITLICHE BESCHICKEN VON SILOPRESSEN

Open the catalog to page 1

SIDE LOADING DEVICES FOR GRAIN BAGGER DISPOSITIVI DI CARICO LATERALE PER INSACCATRICI CEREALI MOBILE FÖRDERSCHNECKE FÜR DAS SEITLICHE BESCHICKEN VON SILOPRESSEN I dispositivi BOSCHI CL1 e CL2, progettati da Boschi Servizi, possono essere installati sull’insaccatrice Boschi IM9, permettendo di effettuare il carico dell’insaccatrice direttamente dai mezzi di trasporto con-venzionali, abbinando all’efﬁ cienza del sistema un’investimento più contenuto. IMPIANTO IDRAULICO, COCLEA DI CARICO LATERALE E TRAMOGGE PER LO SCARICO. • Impianto idraulico, installato a bordo dell’insaccatrice, composto da gruppo...

Open the catalog to page 2

Side Loading Devices - Datasheet

Side Loading Devices - Datasheet

Catalog excerpts

All Boschi Servizi Srl catalogs and technical brochures