Straw spreader - Sawdust spreader for beddings, cubicles and feeders

Revolving unwinders for round bales with conveyor and straw-thrower for beddings, cubicles and unloading in feeder SBi, SBi/i HYBRI The SBi/i Hybrid is equipped with catenary of unrolling with sleepers which allow the use of very chopped products and, thanks to the independent motor on the conveyor and to the "short-straw kit" the parallelepipedal bales can be used. Data here-shown are approximate and may change without notice The SBI 1480 unwinders can hold a round bale of 120 cm base and any diameter. Twines or wires that wrap the bales are easily eliminated by the operator after loading. You...

The SBQI Bicieffe feeder-distributors can hold a bale of any size in the model 1480 and two bales (max 70x120) in the model 1780. Changing the speed of unrolling, both round bales and cornstalks can be used (they do not work with round bales of hay). The straw-thrower with four rows of springs ensures a jet of product up to 11 m of distance by the extremity of the conveyor. Revolving feeder-distributor for paral/e/epipedal and round bales with conveyor and straw-thrower for beddings and cubicles With the "cubicle kit" and the inversion of rotation of the straw-thrower, the distribution of the...

SPAND The sawdust spreaders series SPAND Bicieffe 36 distribute optimally and uniformly the various types of sawdust, the wet separated, the chopped straw. The distribution is performed with a turbine that works without admission of air in order to contain the dust emission to a widely acceptable level. These versions are worn with a three-point linkage at the tractor. The “pivoting wheels kit” is necessary to compensate for small tractors or in the presence of precarious gratings . The hydraulic gear-case replaces the direct attacks on the tractor when the control units of these are not enough,...

Revolving unwinders for round bales for unloading in feeder The unwinders series SBI Bicieffe for feeder can hold a bale of 120 of hay, straw or half-dry. They can be supplied with different chains depending on the used product. In the roundup version, cheaper, using a double-acting hydraulic tractor with a two levers distributor on the machine, this allows the orientation and unrolling. They can be equipped with an independent unit and a loading fork. We also produce versions worn with a lift or a telescopic or front loader attachment, so as electric and fixed versions. Working width Length...