YOUR ATTACHMENT SPECIALIST - www.bressel-lade.de Send us a mail to: [email protected] Rear view Front view The Fork Positioner is designed for loading goods on pallets. The high value pallet fork tines are adjustable by hydraulic in the distance to each other. This function works syncron. Please note: It is not possible to grab or clamp materials between the tines. Special: Side shift, swich valve INFORMATION • 2 forged pallet fork tines • Fork produced acc. ISO 2330 and ISO 2328 • Lifting capacity by center of gravity: ISO 2/3 = 500mm, ISO 4 = 600mm • Syncron working tine adjustment • Width over all (standard model): 2500kg lifting capacity ISO FEM II B = 1410 mm 3500-4500kg lifting capacity ISO FEM III B = 1450 mm 6000kg lifting capacity ISO FEM IV B = 1510 mm 11/2020 - NEW ! Now with optional integrated sideshift available. The working range of the tines are used also for sideshifting. This reduces the own weight and center of gravity. Up to the position of the tines it allows a bigger working range of the side shift than before. For this function is an electrical 12V powerline needed. Free selectable colors RAL 7043 Other colors possible for an extra surcharge - Several variants available quickly! Stand: 2020 | Der Verkauf erfolgt über den Land- und Baumaschinenhandel | Alle Preise

H20-H22 FORK POSITIONER for loader from 1,5 to 6tons lifting capacity A PERFECT ATTACHMENT IN 3 STEPS CHOOSE PRODUCT Tine length Lifting capacity Range (mi-mi) LOADER QUICK COUPLER (INDICATE BRAND & TYPE) Euro-System Frontloader without Euro-coupling system Courtloader with max. 1,5to lifting capacity Wheel- or telescopic loader Please indicate ALWAYS manufacturer and type of the loader on inquiries or orders! SPECIAL EQUIPMENT Wider model ISO 2 (adjustable range 370-1355mm) Wider model ISO 3 (adjustable range 350-1335mm Wider model ISO 4 (adjustable range 330-1315mm) Pressure limiting valve...