Isotec-Elycem_Catalogue
4Pages

{{requestButtons}}

Catalog excerpts

Isotec-Elycem_Catalogue - 1

Reinforced Fibre-Cement Board INSULATED VENTILATED FACADE WITH TRADITIONAL FINISH: ISOTEC PARETE + ELYCEM FOR A VENTILATED AND INSULATING FACADE WITH PLASTER FINISH

Open the catalog to page 1
Isotec-Elycem_Catalogue - 2

Reinforced Fibre-Cement Board Ventilated facade with plaster finish System advantages An evolution of traditional building techniques and external insulation systems, this solution comes from the combination of Isotec Parete thermal insulating panels with Elycem fibre-cement board, to offer the following advantages: 1. Ready to use 2. Easy to install 3. Ideal for plasterers and cladding technicians 4. No architectural design needed 5. For renovating or creating new facades with plaster finish 6. Strong impact resistance 7. Extreme durability ENERGY SAVING PROTECTION AGAINST MOISTURE,...

Open the catalog to page 2
Isotec-Elycem_Catalogue - 3

ELYCEM: Reinforced Fibre-Cement Board Elycem is a Portland cement board lightened with mineral aggregates and reinforced on both sides with two layers of fibreglass mesh. Its high mechanical strength, speed of installation and ease of finishing allows Elycem to be used as a finishing sheet for exterior building walls made with dry or mixed systems, both for new constructions and for renovations. Elycem’s flexibility, modularity and sturdiness makes it an effective plaster carrier for ventilated facades, providing protection in all weather conditions. Once the sheet has been installed, the...

Open the catalog to page 3
Isotec-Elycem_Catalogue - 4

Installation of Elycem Board Once the Isotec Parete panels have been installed, the Elycem cement board can be fixed. Position the board vertically, perpendicular to the Isotec Parete metal stiffener and fix with appropriate screws, placed at a distance of 20 mm from the edge and at a maximum distance of 200 mm from each other. Position the screw head so that it is aligned (on the same plane) with the surface of the board. Leave a distance of 3 mm between one cement board and the next, along the vertical edges of the sheet (long side). Place the horizontal joints side by side (short side)...

Open the catalog to page 4

All Brianza Plastica catalogs and technical brochures

  1. Isotec_Range

    4 Pages

  2. Elyonda

    2 Pages