video corpo

Laying instruction Elysol
4Pages

{{requestButtons}}

Catalog excerpts

Laying instruction Elysol - 1

ELYSOL: THE NEW POLYCARBONATE SHEET A versatile, lightweight and transparent sheet that provides natural lighting wherever it is installed, either on the roof or curtain walls. Simple and quick to apply, it is suitable for a thousand uses: on the terrace or garden, for building greenhouses, canopies, projected roofs, walkways and various types of roofing or curtain walls.

Open the catalog to page 1
Laying instruction Elysol - 2

TRANSPARENT AND RESISTANT Elysol compact polycarbonate straight sheets are UV-protected on one or two sides sides, lightweight, highly resilient, versatile, with an excellent weather resistance; they have both a good fire performance and an exceptional capacity to transmit light. They are available in corrugated or ribbed profile. Corrugated ELYSOL sheet 1 Choose the screws according to the material of the structure and, to correctly fix the sheets, drill a hole 3 mm larger in diameter than the screw, in order to compensate the thermal expansion of the sheet. 2 To cut the sheet, take the...

Open the catalog to page 2
Laying instruction Elysol - 3

THE LARGE SIZE OF THE HOLE IS FUNDAMENTAL 1 ELYSOL FOR ROOFING Lightweight and easy to handle, Elysol can also be easily installed on lightweight structures, even in case of large roof surfaces. It is recommended that the sheets protrude by 20 cm along the lower edge of the pitch; if you also want an overhang on the sides, allow one rib or corrugation to protrude. 1 For the first row of sheets, holes can be drilled even before laying the sheets; this is quicker, but it is important to have taken the exact measurement from the free edge of the sheet to the first fastening batten, at the...

Open the catalog to page 3
Laying instruction Elysol - 4

ALWAYS MAKE A HOLE AND FIX IN CORRESPONDENCE OF A RIB OR CORRUGATION 1 ELYSOL IN CURTAIN WALLS 1 To accommodate the slope of the roof, inclined cuts must be made; measure the exact inclination with the false square and mark it on the sheet correctly. 2 On the wall, the fixing procedure does not change, except for the fact that, if the sheets are corrugated, the corrugation must be positioned towards the inside. The screws must still be applied in correspondence of the corrugation or of the rib. 3 The holes (3 mm larger than the diameter of the screw) must be drilled with the sheets...

Open the catalog to page 4

All Brianza Plastica catalogs and technical brochures

  1. Elyonda LT

    2 Pages