BITPS 3.0 poultry scale with Bluetooth and USB
28Pages

Deutsch English

Deutsch English English Bröring Informationstechnologie Gewerbering 4 49393 Lohne Germany Phone: +49 4442 910436 E-mail: info@broering.de www.broering.de Last revisited on: 22 November 2019

1 Scope of delivery car charger power supply English scale carrying case 2 Operation eyelet for hanging up USB-B-jack charging / data transfer on/off button touch screen hook protection hook for weighing calibration weight [optional]

2.2 Switching on and off The scale is switched on by pressing the on/off button. Press and hold the button (for more than 3 seconds) to turn the scale off. 2.3 Charging The scale is charged using the included power adapter or the included in-car charger [5 V, 1 A]. Charging with the supplied batterie charger takes approximately 3 hours. The scale should be turned off while charging. There is an eyelet on the top of the housing for hanging the scale. A hook is mounted on the underside of the housing, which is protected by a hook guard. A wing clamp, for example, can be mounted on this hook...

3 Measuring display and operating modes 3.1 Measuring display In both operating modes, the name of the balance, the battery level and the date and time are displayed alternately in the header line at the top, separated by a red line. The "Tare" button is used to tare the balance and the "Menu" button is used to call up the menu to make settings. 3.2 Operating modes 3.2.1 Simple mode SCALE-2019-123 Tara Menu Reset In simple mode, the Bluetooth interface is permanently activated. The measured values are continuously transmitted via the Bluetooth interface and can be received and stored with...

3.2.2 Advanced mode SCALE-2019-123 House no.: 1 In advanced mode, measurement series can be created on the balance. The measured weights are stored on the balance and statistical data is shown on the display at the same time. To transfer the data to an Android device, the Bluetooth interface is activated and the individual measurement series can be read and processed with the Android device. In advanced mode, the battery runtime is slightly longer because the Bluetooth interface is deactivated most of the time. The last measured value can be deleted using the "Delete" button. 3.2.3...

4 Tara To tare the balance, press the "Tara" button on the measuring display. The balance is then tared to the current load on the hook. Once the message "Tara..." has disappeared from the display, the balance is ready for use again. 5 Menu 5.1 Test series This menu is only available in advanced mode. 5.1.1 Continue test series Continue an already created test series 5.1.2 Create new test series A new test series is created. You will be prompted to enter a house number. This number can be chosen at will and a number has to be entered. The current measurement series is completed, meaning it...

5.2 Stability 5.2.1 Minimum weight The measured weight must be above the minimum weight before the balance can recognize the weight as stable. Range: 20 g to 8000 g. 5.2.2 Deviation This setting is used to improve the stability detection of fluctuating weights. The value is the percentage deviation from the mean value of the measured weights and can be set within a range of 2% to 20%. If the deviation is high, a stable weight is detected more quickly at the expense of accuracy. 5.2.3 Notification tone If a stable weight is detected, it can be set whether this is signalled by an acoustic...

5.5 Automatic shutdown After prolonged use, the scale switches off automatically to conserve battery power. This time can be set between 1 and 99 minutes. 5.6 Operating mode Here you can choose between simple and advanced mode. For more information, see “3 Measurement display and operating modes”. 5.7.1 No tare The scale does not tare when turned on. 5.7.2 Tare query When the scale is switched on, the user must specify whether taring is to be performed. 5.7.3 Automatic tare The scale automatically tares when turned on. 5.8 Language The languages German, English and Russian can be selected....

5.12 Debug mode This setting is not required in normal operation and should not be activated by the user. This setting is only required for repair and diagnostic purposes. 6 Bluetooth The scale has a Bluetooth interface for data transmission. The Bluetooth name consists of SCALE and the serial number, for example SCALE-2019-123. The Bluetooth name is also displayed in the header. For an existing Bluetooth connection, the name is displayed in green font, otherwise in white font.

7 Android App The following describes the installation and use of the "BIT PS 3.0" app. The Android device should use at least Android version 4.4 (KitKat). 7.1 Installation Open the Play Store on your Android device and search for "BIT PS 3.0". Now click on "Install" to install the app. Alternatively, you can scan the QR code at the bottom of this page. When the installation is finished, you can start the app. If you have any questions regarding the installation or operation of the program, please contact us: Bröring Informationstechnologie Gewerbering 4 49393 Lohne Germany Phone: +49 4442...

First check whether both the scale and the Android device are sufficiently charged and switched on, and then start the program. After starting the program, you will see the following screen. In this menu you will find the following sub-items: Start new measurement series: Create a new measurement series Show archive: Open existing / archived measurement series Master data: Create and edit master data Setting Up a Bluetooth Connection to Your Scale Choose language: Show scale data: View the data stored in the balance and save it on the Android device. Show cloud data: View existing online...

7.3 Using the app 7.3.1 Create new measurement series To create a new measurement series, tap on the "Start new measurement series" field, which opens the following window. English Once the necessary information has been entered, it can be saved using the "Save" button. Click the "Save and start" button to save and immediately start the newly created measurement series. The "Reset entries" button resets all entries. The "Cancel" button closes this page without saving the changes.