Speedmix™

Speedmix™

Speedmix™

Product catalog summary
Application: The Speedmix™ Batch Mixer is designed for processing free-flowing dry solids in the feed, food, and chemical industries. It supports various loading degrees, maintaining consistent mixing quality from 10% to 100% of its capacity. The mixer can start under full load due to its soft-starter feature and is available in capacities ranging from 1,000 to 10,000 liters.
Mixing Efficiency: The mixer features optimized trough geometry and paddle design, reducing mixing time to 90 seconds and achieving a homogeneity variation coefficient (CV) of 2-5% at a 1:100,000 mixing ratio. The twin discharge gates enable a discharge time of less than 10 seconds, allowing up to 20 mixing cycles per hour.
Cross-Contamination Prevention: The design minimizes product residues to ≤ 0.05%, reducing cross-contamination risks. The mixer is easy to clean, with non-corroding steel outlet gates and profiled rubber seals for processing powdered materials.
Maintenance: The mixer requires minimal maintenance. Paddles can be adjusted or replaced individually, and the shaft-mounted gearmotor drive only needs oil changes. The large lateral door facilitates easy access for maintenance and cleaning.
Liquids Addition: The Speedmix™ can mix up to 5% liquid, with single or twin spray pipes available. These pipes have electrical heating pads to reduce liquid viscosity and prevent clogging. The spray pipe can be swung up for easy nozzle maintenance.
Technical Specifications: The document provides detailed dimensions and motor specifications for various models (AHML 1000 to AHML 8000), highlighting the compact design and flexible application of the mixer.
See more

Catalog excerpts

Speedmix™-1

SpeedmixTM Batch Mixer. AHML. Innovations for a better world.

 Open the catalog to page 1
Speedmix™-2

SpeedmixTM Batch Mixer. AHML. SpeedmixTM. Flexibility and optimal mixing results. Application. The Speedmix™ is suitable for processing all free-flowing dry solids encountered in the feed and food industries as well as in the chemical engineering industry. Depending on operation, it allows mixing with different loading degrees. In processing dry solids, the same mixing quality is achieved with any value between 10 and 100 % of the maximum loading degree. In addition, a soft-starter allows the machine to be started under full load. The Speedmix™ is available in versions holding between 1,000 and...

 Open the catalog to page 2
Speedmix™-3

SpeedmixTM Batch Mixer. AHML. High sanitation standards. Mixing with very low residues. Low cross-contamination. The interior of the mixer and the mixer paddles allow quick and easy cleaning. Moreover, the outlet opening extending across the full length of the trough in conjunction with the ideal trough geometry minimize product residues (dry ≤ 0.05 %) and thus diminish the risk of cross-contamination. The twin outlet gates in all design versions are made of non-corroding steel. Customer value. –– Short mixing time of 90 s –– Consistent mixing quality CV 2 – 5 % –– Short discharge time ≤ 10 s...

 Open the catalog to page 3
Speedmix™-4

SpeedmixTM Batch Mixer. AHML. Minimum maintenance. Smartly designed wear parts. Low maintenance requirement. Worn-down paddles can be individually readjusted or replaced. This significantly reduces the cost of maintaining the mixing tool. In addition, the shaft mounted gearmotor drive does not require any maintenance apart from oil changes, and only a short time is required for exchanging the split shaft seals. Furthermore, the large lateral door offers easier access to the interior of the mixer for maintenance and cleaning.

 Open the catalog to page 4
Speedmix™-5

SpeedmixTM Batch Mixer. AHML. Liquids addition. Depending on the specific nature of the material and the liquid to be mixed, the Speedmix™ is capable of admixing ≤ 5 % liquid. Spray systems purpose-designed for this mixer are available: –– Single spray pipe for addition of 1 liquid. –– Twin spray pipe for simultaneous addition of 2 liquids. The spray pipes are equipped as standard with electrical heating pads. The heat reduces the viscosity of the liquid as a function of its specific characteristics and prevents chocking of the lines and nozzle, reducing the liquids injection time. To facilitate...

 Open the catalog to page 5
Speedmix™-6

SpeedmixTM Batch Mixer. AHML. Compact design. Flexible application.

 Open the catalog to page 6
Speedmix™-7

AHML 1000 AHML 2000 AHML 6300 HW: hollow shaft VW: solid shaft

 Open the catalog to page 7

All Bühler Group catalogs and technical brochures

  1. OLCB

    4  Pages

  2. MZMO/MSDF

    4  Pages

  3. DRHG

    4  Pages

  4. MTSD

    4  Pages

  5. DNCB

    4  Pages

  6. MYFD / MOZG

    8  Pages

  7. MHXS

    4  Pages

  8. MTCH

    2  Pages

  9. MTKC

    2  Pages

  10. MTVA

    8  Pages

  11. Twitor®

    8  Pages

  12. MTCG

    8  Pages

  13. MFVH

    2  Pages

  14. MHSA

    4  Pages

  15. MKZH

    4  Pages

  16. UltraWhite

    8  Pages

  17. MKLA

    4  Pages

  18. MKLD

    4  Pages

  19. SuperPoly

    2  Pages

  20. BSPB

    6  Pages

  21. MMUA

    2  Pages

  22. DFRT

    2  Pages

  23. Portalink

    13  Pages

  24. AHKA

    4  Pages

  25. AHKG

    2  Pages

  26. LBEB

    2  Pages

  27. LBCB

    2  Pages

  28. LBBA

    2  Pages

  29. Uni Dry

    8  Pages

  30. OLSA

    4  Pages

  31. LCBB

    10  Pages

  32. OLCC

    4  Pages

  33. DRWE_Flyer

    2  Pages

  34. DRWD_Flyer

    2  Pages

  35. DRWB_Brochure

    6  Pages

  36. DRWA_Brochure

    8  Pages

  37. DRTA_Brochure

    6  Pages

  38. DRPS_Flyer

    2  Pages

  39. DRPR_Flyer

    2  Pages

  40. DRPQ_Brochure

    6  Pages

  41. DRPN_Brochure

    6  Pages

  42. DRPG_Brochure

    8  Pages

  43. DRPA_Brochure

    6  Pages

  44. DRGA_Brochure

    6  Pages

  45. DRCA_Brochure

    6  Pages

  46. DRAB_Brochure

    6  Pages

  47. MLUA_Flyer

    4  Pages

  48. MDZE_Brochure

    4  Pages

  49. LEFA_Flyer

    3  Pages

  50. NFAT_Flyer

    2  Pages

  51. MNSH_Flyer

    2  Pages

  52. LAKA_Flyer

    4  Pages

  53. LAIA_Brochure

    4  Pages

  54. LAGA_Flyer

    4  Pages

  55. LADB_Flyer

    4  Pages

  56. LACB_Flyer

    4  Pages

  57. AHSG_Flyer

    2  Pages

  58. AHAS_Flyer

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About AgriExpo
AgriExpo is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. AgriExpo is an entity of VirtualExpo Group.