Top-notch mobile concentrated feed plants ■ Maximum performance with easy handling. ■ User-friendly residue-emptying of the complete plant. ■ Minimum maintenance cost by way of few wear parts. ■ Coarse meal, rolled grain, and other feed components are directly (without rotary valve) fed into the mixer and processed. ■ Pneumatic emptying of the mixer. ■ Feed residue is automatically removed from the mixer bottom by the rotational sucker and discharged. At the same time, high pressure inside the mixer is gradually relieved. ■ An automatic load control caters for a smooth pneumatic discharge. ■ The emptying performance is up to 26 t/h via discharge pipe, via discharge arm up to 60 t/h. ■ The suction/pressure pipes and the discharge arm are at the left side of the truck. The operating position and the hose stowage on the right-hand side remain unobstructed. The new filter unit is integrated within the suction-pressure-mixer. Minimum pressure drag inside the autonomously pneumatic-cleaning filter unit ensures an efficient, continuous sucking throughput. The filter unit is maintenance-free and easily accessible Short conveying distances and fully-opening ball valves ensure low drag and a high conveying performance.

Flowchart 1. Suction flap 2. Hammer mill 3. Grain rolling unit 4. Rotary piston blower 5. Filter unit 6. Suction-pressure-mixer 7. Rotational sucker 8. Feed oil tank 9. Feed component hopper 10. Discharge pipe 11. Discharge arm Technical data at a glance Drive Blower Suction pipe Mill Grain rolling unit Direct drive by truck engine up to 320 kW (440 PS) or Plant engine Mercedes-Benz OM 501 LA 290 kW (395 PS) Aerzener rotary piston blower with pre-inlet cooling Pipe diameter: 100 mm (90 mm) Hammer mill HF400 with 72 or 100 hard metal hammers Screen cage with two screens Milling performance: up...