CONSTRUCTION, LANDSCAPE & TILLAGE

PULL DIRT SCRAPERS Bush Hog’s new DSP Line of Pull-Type Drag Scrapers, with standard fixed axle or optional tilt axle, is ideal for moving large quantities of material, leveling, and finish grading. The DSP units come available in 8’, 10’ and 12’ widths. DSP scrapers equipped with the optional tilt axle can do everything the standard axle does, as well as remove material on an angle for sloping, terracing and ditching. Material can be transferred by dragging it to nearby locations and raising the scraper to deposit the load. Surfaces can be graded and leveled by scraping material from high areas...

POST HOLE DIGGERS Model PHD2403 shown Whether you need to drill holes for posts, tree plantings, structural support members, or other tasks, Bush Hog® has a post hole digger to meet your needs. Our three 2400 Series models fit both Cat. 1 and Cat. 2 tractors. Augers are offered in both standard and heavy duty versions in sizes from 6 inches to 24 inches depending on digger model. Tough soil penetration is no problem for the powerful Bush Hog® post hole diggers.

CONSTRUCTION • Special alloy pinion gears and tapered roller bearings on both sides of each gear • Shear pin driveline protection Augers... the heart of the digger • Bush Hog® offers both regular duty and heavy duty augers in a variety of sizes, from 6-inch to 24-inch depending on the model • 2” Round hub connection • Replaceable drill teeth • Heavy duty augers are equipped with double flighting for more cutting surfaces and faster, easier digging-especially in heavier soils

HYDRAULIC POST HOLE DIGGERS Planetary Hydraulic drive features a high torque level to power the auger through the most demanding conditions. All augers are heavy industrial grade with 3/8" thick flighting. Sized in diameters from 6" to 36" (depending on model), these are excellent for all soil conditions and solid rock. The Farm and Ranch PHDHF Series features a selection of mounting brackets for skid steer loaders and front end loaders. The Commercial Grade PHDHC Series features mounting brackets for excavators, skid steer loaders, backhoes and front end loaders. All mounting brackets have a...

CONSTRUCTION *All values are theoretical. Specifications and models are subject to change without notice. AVAILABLE AUGER TYPESNote: Auger tips are available only in black. Shown in yellow for visual effect only.HRAD* HSRA* HSDA** T-POST** * Available only for C-Series posthole diggers ** Available for both C & F-Series posthole diggers

Break ground, not your back! Easily access those tight work spaces and get down to some digging. Bush Hog®’s new line of XD series backhoes are designed for tractors ranging from 18 to 100 horsepower along with skid steers and mini skid steers depending on the model. Perfect for digging footers, trenches and all general landscaping and construction needs, the XD series backhoes deliver value and strong performance to your operation.

Built To Last. XD65C Performance Features Digging Depth (2 ft. flat bottom): 6’4” Overall Operating Height (fully raised): 91” Reach from Swing Post: 100” Bucket Rotation: 180° Swing Arc: 150° Safety Features Stabilizer Width: 72”

PICK A COLOR TO MATCH YOUR TRACTOR OPTIONAL FEATURES Extendable Backhoe SUBFRAME MOUNTING For Tractors 30-100 HP Xtreme Digger Skid Steer 6’ GREASABLE When you need to get down to work, start The model specific subframe system absorbs the stress of The Bush Hog® digs even deeper with the Extendable XD95EL PINS digging with the Bush Hog® XD600S. This skid heavy lifting. For a of hydraulically extending an extra 24” to dig 11’ model. Capable list of available applications 4” deep, the extendable dipper stick gives you the extra reach contact Bush Hog. when you need it. When contracted, the bucket...

For Tractors 18-28 HP and Mini Skidsteer With a digging depth of 6 feet and an 8-foot reach, the XD65 gets down and dirty, breaking the frostline and finishing the job quickly. Digging 7.5 feet deep and reaching 10 feet across, the XD75 breaks ground and keeps on going. With an excavator-style curved boom and easy-to-use controls, the XD75 is ready to handle any ground conditions from topsoil to clay and gravel. For contractors and landscapers that need to dig deep, but not in their pockets, the Bush Hog® XD95 makes the grade. The large XD95 extends the usefulness of 30-100 HP tractors with digging...

AG, BGR & BRGR SERIES CONSTRUCTION Bush Hog’s® AG, BGR, and BRGR-series grapples are built tough and help you make quick work of larger jobs. The AG and BGR grapples use an open bottom design to move brush and debris, rake, and dig without picking up dirt. The BRGR-series provides the operator with the grasp and hold abilities of a grapple, along with the storage capacity of a conventional bucket. Each model is designed to mount onto a universal skid steer mount. Let Bush Hog’s® grapples help you get a grip on your work.

Brush Grapple Series (BRGR) • Constructed of 1/2-inch top quality steel • 3/8-inch solid quick attach plate • 9-inch aggressive teeth • Protected cylinders and hoses • Extra wide opening for large capacity work • Independent grapple arms for uneven loads • Max. 100 HP for rubber tire machines • Max. 80 HP for rubber track machines • Fits all skid steers and tractors using the universal skid steer quick attach system

Bucket Grapple Series (BGR) • Constructed of 1/2-inch top quality steel • 3/8-inch solid quick attach plate • Protected cylinders and hoses • Wide opening for large capacity work • Independent grapple arm • Solid bottom for materials • Max. 100 HP for rubber tire machines • Max. 80 HP for rubber track machines • Fits all skid steers and tractors using the universal skid steer quick attach system