Rear-Mounted Boom Mowers

Extend your reach and productivity! The ultimate in versatility, Bush Hog®’s rugged rearmounted boom mowers are designed to trim trees, brush, or hedges and mow behind guardrails, over fences, down embankments, and around ponds. With four models reaching from 12' – 18' from the tractor centerline, there’s almost no limit to what you can accomplish. They’re easy to operate and built to provide years of dependable service. Two models reaching 18' – 20', offer forward reach capability, allowing the operator to bring the arm and mower head from behind the rear tire to alongside the tractor cab for...

Bush Hog®’s Boom Mowers Take Cutting to New Heights. Our dependable, rugged rear-mounted boom mowers are valuable land management tools. Four models cover a wide range of municipal and agricultural applications and tractor sizes, with two additional models recommended for more rigorous, continuous duty work. (RMB models to be used on tractors equipped with cabs only, and for rotary mower heads, protective screen material must be installed.)

PT5 Mower Features The unique PT5 is powered by the tractor’s hydraulic system, requiring only 3.7 gal/min. flow to operate the unit. A Flow Control Valve Kit comes standard on current models to divert excess hydraulic flow back to the tractor. The PT5 fits tractors as small as 15 HP. Its unique “swing over” design enables the unit to work on either side of the tractor. The PT5 is equipped with a swing arm and sickle bar head to meet the pruning needs of horticulturists and landscapers alike. 4 PT5-2 POWERTRIM 3/4" Cutting Capacity 59" Cutting Wi

RMB Series Features • Multiple cutting head options allow you to fit an RMB Mower to your particular application. A rotary cutter head capable of cutting brush up to 4 inches" in diameter is available for use on the larger RMB1660, RMB1865(E), RMB1880F, and RMB2080F models. Flail heads capable of mowing either grass or brush up to 2" in diameter, or sickle bar cutters that specialize in trimming hedges and mowing round out the cutting head options. • RMB models fit tractors as small as 45 HP and weighing a minimum 4,410 lb. Forward Reach models fit tractors 80 HP and up weighing a minimum of...

REAR-MOUNTED BOOM MOWER SPECIFICATIONS MODELS: RMB1445-1 RMB1660-1 RMB1865-1 Minimum Tractor PTO HP/Weight Tractor PTO See Head Selection Chart – Varies Based on Head Choice 540 Machine Weight with Flail Totally Independent Cat 1/2, 3-Point Mount Hydraulic System Open Center Hyd. System (Closed Center Kit Avail.), Tractor Remote Outlet, 3.7-5.6 GPM, Flow Control Valve Kit Std Cat 1/2, 3-Point Mount Attachment Method Cable-Controlled Quick Detach (QD) Standard Cable-Controlled Quick Detach (QD)/Electronic Controls (XTC) Standard Cable-Controlled Hydraulic Remotes Standard Maximum Reach, Horizontal...

FORWARD REACH REAR-MOUNTED BOOM MOWER SPECIFICATIONS MODELS: Tractor Minimum Weight (lb.) Hydraulic System Totally Independent Attachment Method Cat 2 & 3, 3-Point Mount Two-Way Rotor Engagement – Electric Control (ERC) Controls Maximum Reach, Horizontal (A) Maximum Height, Horizontal (B) Maximum Height, Horizontal ( C) Maximum Height, Vertical (D) Variable Forward Reach capability available on RMB1880F and RMB2080F models. HEAD SELECTION CHART FLAIL HEAD MODELS: Minimum Tractor PTO HP / Weight Rotor / Knife Typical Application Cutting Capacity Cutting Width Omega Flail Uni-Boot Flail Hedge Cutting,...

2501 Griffin Avenue, Selma, Alabama 36703 Tel: 800-363-6096 | Fax: 334-874-2701 BushHog.com APPAREL AND MERCHANDISE CONTENT DISCLAIMER: The products and information contained in this literature are subject to change without notice. Bush Hog® reserves the right to improve our products and make changes to specifications, designs, and standard equipment without notice. For additional product information, please visit Bush Hog®'s website or see your dealer for complete details. (hog icon) are registered trademarks of Alamo Group Inc. Copyright © 2020