mobile loading unit The Alternative to Transfer Vehicles. CanAGRO is currently developing various design studies for mobile loading units for the non-energy dependant and flexible transfer of bulk materials.

transport CanAGRO is currently developing various design studies for mobile loading units for the non-energy dependant and flexible transfer of bulk materials. The basic variant consists, as always, of a chassis-mounted feed hopper and a leading hydraulically sideways extendable and height adjustable transfer screw feed with a diameter of 250 mm (120 t/h), 330 mm (up to 200 t/h) or 400 mm (up to 300 t/h) depending on requirements and intended application. Designs with chassis for attach- ment to a tractor or other available vehicles, as well as simplified models for 3-point attachment are planned....

as an alternative transfer vehicle during The grain can be directly loaded onto lorries at the edge of the field. as a mobile loading unit for grain merchants The grain stored by farmers can be thus loaded onto a lorry. for non-energy dependant loading of railway wagons The delivery lorry can drive up to the feed hopper of the loading unit with its entire rear wall width and transfer the bulk material via the transfer feed screw. non-energy dependant and un-coupled from trailer loading of seed drills and fertilizer spreaders The transfer feed screw of the loading unit has a good reach and can...

Your distributor: Mail: [email protected] www.canagro.d