Catalogs >
Canarm AgSystems >
NURSERY FEEDERS

NURSERY FEEDERS
5Pages

Catalog excerpts

NURSERY FEEDERS Easily adjusted feed flow. Stainless steel construction. Fittings and bolts inside feeder are stainless steel. Double-sided and single-sided available. Available in 24”, 30”, 36”, 42”, 48” & 60” lengths. CANARM LTD. - Corporate Office PO Box 367 2157 Parkedale Ave., Brockville, ON Canada K6V 5V6 Tel: (613) 342-5424 Fax: 1-800-263-4598 www.canarm.com Subject to Change without notice. Arthur Manufacturing Facility #7686 Concession 16, RR 4 Arthur, ON Canada N0G 1A0 Tel: (519) 848-3910 Fax: (519) 848-3948 CANARM LTD. - USA Warehouse 808 Commerce Park Drive Ogdensburg, New York, USA 13669 Tel: 1-800-267-4427 Fax: 1-800-263-4598

Open the catalog to page 1

NURSERY FEEDER NUT1/4FSSSFLANGE NUT 1/4" L S 1/4" SS FLANGE NUT PLASTIC BRACKET SS BRACKET PLASTIC BRACKET WAS1/41/4" SS WASHER SS 1/4" SS WASHER DROP TUBE HOLDER DROP TUBE HOLDER 2080205 - SS NURSERY FEEDER BRACKET (REPLACEMENT) ONLY SIDE VIEW SIDE VIEW ASSEMBLY INSTRUCTIONS 1. Fasten plastic brackets to feeder as shown. 2. Snap drop tube holder into place. NOTE: 30-60” feeders come with extra holes for drop tube holder. Use the set of holes that best suits your need. www.canarm.com Subject to Change without notice. Swine product is non-stock and non-returnable.

Open the catalog to page 2

WET/DRY FEEDERS WET/DRY FEEDERS FEATURES • Innovative R Adjust™ System. • Feeder is 41” tall which means greater hopper capacity. • Feeder Holes 15” wide to accommodate heavier finishing weights. (Custom sizes available on request). • Available with 2, 3, 4 and 5 holes per side (30”, 45”, 60” and 75” wide feeders). • Feeder has a low 4 ¾” front lip and wide feed spaces to provide optimal feed access and minimum waste. The wide feed space allows pigs to eat straight at the feeder rather than at an angle that can block feed spaces. • The overall larger size promotes efficiency. • Added...

Open the catalog to page 3

FEEDER PIN-IN SYSTEM ASSEMBLY - NURSERY BOTTOM LOOP - 2010330 TOP LOOP / FLIPPER MOUNT - 2010331 FLIPPER - 2010332 2010324 (Hardware is included with package) 31" SS CHANNEL ONLY + PL + LOOPS - 2013329F FLIPPER - 2010332 2013329FDR (Hardware is included with package) ASSEMBLY - FINISHER 35" LG. HINGE PIN c/w WASHER - 2010202 BOTTOM LOOP - 2010330 TOP LOOP / FLIPPER MOUNT - 2010331 FLIPPER - 2010332 2010327 (Hardware is included with package) 30" LG. HINGE PIN c/w WASHER - 2010203 BOTTOM LOOP - 2010330 TOP LOOP / FLIPPER MOUNT - 2010331 FLIPPER - 2010332 2010325 (Hardware is included with...

Open the catalog to page 4

ORDERING GUIDELINES NURSERY FEEDER **15-75 LBS. PIGS 1. Order feeder - Specify length, calculate using 4-5 pigs per opening (openings are 6” o.c.). Order pin-in packages - Order feeder parts package (2010324) for mounting one feeder on spindle panels. - Order two feeder channels (2013329FDR) for mounting on plastic panels. - Order feeder package for finisher panel, specify 30” or 35” pin (for wet/dry feeders). Order feeder - Specify length, calculate using 10-12 pigs per opening (openings are 15” o.c.). - Specify pin-in or floor mount. Order agitator - If required for high moisture feeds....

Open the catalog to page 5

NURSERY FEEDERS 5Pages

Catalog excerpts

All Canarm AgSystems catalogs and technical brochures

NURSERY FEEDERS
5Pages