Catalogs >
Canarm AgSystems >
PLASTIC WALL EXHAUST FANS

PLASTIC WALL EXHAUST FANS
4Pages

Catalog excerpts

PLASTIC WALL EXHAUST FANS GOOD PERFORMANCE • DEPENDABLE • GREAT VALUE IdeaLLy suIted FoR swIne and PouLtRy buILdIngs NOW AVAILABLE WITH PLATFORM MOUNT EC MOTORS for energy savings 12” to 36” sizes. Molded impact resistant black polyethylene housings with uV prohibitors. standard base mount motors are easily replaced. easy to remove shutter with welded steel frame and aerodynamic PVC louvers are held in place by a stainless spring steel pin and is virtually indestructible. Powder coated exhaust guard. Corrosion proof airfoil polypropylene blades on 12” to 24” sizes. 36” fan has a galvanized blade. Heavy duty motors are totally enclosed, ball bearing, high efficiency dual volage, single phase, 60 Hz (PLF36-H is 230 volt only). also available with eC motor. EASILY REMOVABLE SHUTTERS Flip latch open to release shutter ACCESSORIES CONES WINTER INSERTS Performance enhancing cones in durable black polyethylene are available for 24” and 36” fans. Insulated 16” to 36” winter inserts. R8 insulation value and unique double seal protect against heat loss. Low air restriction 12” to 24” weather hoods. Most hoods restrict 20 to 35% of air flow, our design restricts less than 10%. WARRANTY • 5 years on plastic housing • 1 year on all other components CANARM LTD. - Corporate Office PO Box 367 2157 Parkedale Ave., Brockville, ON Canada K6V 5V6 Tel: (613) 342-5424 Fax: 1-800-263-4598 www.canarm.com Subject to Change without notice. Arthur Manufacturing Facility #7686 Concession 16, RR 4 arthur, on Canada n0g 1a0 tel: (519) 848-3910 Fax: (519) 848-3948 CanaRM Ltd. - usa warehouse 808 Commerce Park drive ogdensburg, new york, usa 13669 tel: 1-800-267-4427 Fax: 1-800-

Open the catalog to page 1

PLASTIC WALL EXHAUST FANS SPECIFICATIONS Specifications Rough Opening AFR Required Shutter Blade Frame mat'l Test Code Stainless Steel Notes: AFR is the airflow ratio. Higher AFR indicates better performance under static pressure and against wind. It is calculated by dividing fan cfm at 0.20 static pressure by cfm at 0.05 sp. Test results are complete with cone where indicated. All tests completed with shutters installed. Amps indicated are actual at 230 volts. When determining amp load for variable speed, add 20% to listed numbers. Amp loads for 115 volt supply will be approximately...

Open the catalog to page 2

ThE FIRST aNd ONLY MOTOR OF ITS kINd IN ThE aGRICuLTuRaL INduSTRY Our ECsmart Motor is an Electronically Commutated Motor. EC motors are electric motors that have permanent magnets on the rotor and use electronics to control the voltage and current applied to the motor. Canarm brings you our latest innovation - the ECsmart motor featuring patent pending electronics. The result is an ENERGY EFFICIENT motor that runs COOLER than any other in the industry. The First EC motor that can be varied with existing 0-10v signal. Provides feedback for ventilation management. Can be retrofitted in any...

Open the catalog to page 3

MOTOR PLF-EC SERIES • Roto-molded impact resistant black polyethylene housings with uV prohibitors. • Platform mount • Easy to remove shutter assembly, complete with aerodynamic tie-bar poly louvers with stainless steel shutter frame and louver pin. • Corrosion proof airfoil polypropylene blades on 12” to 24” sizes. • Warranty: 5 years on plastic housing. • also available with our standard motor. EC MOTORS for energy savings For complete product information, please see PLF Fans in Exhaust Fan section. Performance Specifications Model Rough Opening Required Stainless Steel Blade mat'l...

Open the catalog to page 4

PLASTIC WALL EXHAUST FANS 4Pages

Catalog excerpts

All Canarm AgSystems catalogs and technical brochures

PLASTIC WALL EXHAUST FANS
4Pages