1. Catalogs
  2. Canarm AgSystems
  3. SUNNE Thermostat
video corpo

SUNNE Thermostat
1 /1Page

SUNNE Thermostat

SUNNE Thermostat
1 /1Page

Catalog excerpts

SUNNE Thermostat-1

CONTROLS & THERMOSTATS CARBON MONOXIDE DETECTOR CTS-M5160 CARBON MONOXIDE DETECTOR CTS-M5160 is a microprocessor based transmitter that detects carbon monoxide and activates relays when the set concentration is met. The CTS-M5160 can be set for rising or falling carbon monoxide levels. • Attaches to a standard 2” x 4” electrical box • Programmable delay (0 - 60 minutes in 5 minute increments) • Input Power: 24V • Sensor Type: Electromechanical • Sensor Life: 2 - 3 years • Relay: Two, SPDT, 1 amp dry contact PRINCIPLES OF OPERATION Electrochemical gas sensors are micro-fuel cells designed to be maintenance free and stable for long periods. Gas continuously enters the self-contained cell through a flow limiting diffusion barrier. The target gas reacts within the electrolyte creating a microamp current flow between the electrodes. No fluid replenishment is required as these cells are not self-consuming. The cell electrodes degrade with time resulting in a typical working life of 2 to 3 years. The CTS-M5 transmitter is powered by a nominal 24 V external power supply in a two-wire connection. It transmits a 4-20 mA, 2-10 V, or an RS-485 signal over the calibrated range of the sensor selected. The transmitter is factory configured and calibrated for the sensor selected when ordered as a complete assembly. This universal transmitter accepts any of the listed sensors into a plug-in socket on the board. Calibration is achieved through a simple zero and span adjustment using the appropriate calibration gas concentration for the sensor installed. THERMOSTATS K-KONTROL THERMOSTATS Great for use on XF and UF10-G fans! KJ161100 KP16110 (Portable Model with plug) • Single KJ16110, portable single KP16110 and two KT16110 stage models. • Reliable Johnson thermostats, low cost. • Moisture proof box. • Convenient flip open cover, stainless steel coil and portable hanger. • Use anywhere portable model - simply plug control into outlet and then the device into the control. • Two stage model for two stages of heating and/or cooling or two speed fans. • Single and two stage models: 16 Amp rating at 120V; 8 Amp rating at 240V. • Portable model: 16 Amp rating at 120V. • Ideal for 120V fans & heaters. TF115 - SUNNE THERMOSTATS • Single stage thermostat for heating or cooling. • NEMA 4 enclosure, stainless steel coil, multi-position mounting. • Large, easy to read, 40˚ - 100˚ F dial • 16 Amp rating at 120V; 12 Amp rating at 240V. RANCO THERMOSTATS • Single T1NEMA4D1 and two stage T2NEMA4D1 models. • NEMA 4 enclosure, easy to read LCD display, lockout switch. • Programmable differential (1 to 30º F). • Wide operating range (-30º to 220º F), user selectable F/Cº. • 8’ temperature probe included (extendable to 400’). • Two stage model for two stages of heating and/or cooling or two speed fans. • 10 Amp rating at 120V; 5 Amp ra

 Open the catalog to page 1

All Canarm AgSystems catalogs and technical brochures

  1. PENNING

    26  Pages

  2. LIFT CRATE

    2  Pages

  3. WATERER OPTIONS

    15  Pages

  4. NANO

    2  Pages

  5. BIRD SCALE

    1  Page

  6. GATES

    41  Pages

  7. TIE STALLS

    10  Pages

  8. ExhaustFans

    13  Pages

  9. iFeed

    1  Page

  10. Flooring

    25  Pages

  11. Tiestalls

    10  Pages

  12. Freestalls

    34  Pages

  13. PBKD Series

    1  Page

  14. HPWP Series

    3  Pages

  15. HAF Series

    1  Page

  16. CCU Series

    1  Page

  17. CA-AG Series

    2  Pages

  18. CA Series

    1  Page

  19. Panel Fan

    1  Page

  20. LF Series

    1  Page

  21. MTC-4C

    1  Page

  22. Heat Lamps

    3  Pages

  23. Hog Drinkers

    5  Pages

  24. Waterers

    15  Pages

  25. CCS Promo

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.