*myagriexpo

Waterers

Product catalog summary

Overview

This document provides a detailed technical overview of Canarm Ltd.'s livestock watering solutions, covering product categories, specifications, installation, maintenance, warranty, replacement parts, valve assembly evolution, and ordering guidelines.

1. Product Categories and Models

Heated Livestock Waterers: Models H50, HL50, H100, H200 designed for different herd sizes, featuring energy-efficient heating elements and insulation.
Single Head Waterer (SSH20): Stainless steel, float-controlled, suitable for calves and cows with universal mounting.
Poly Waterer (HLW-P50): UV resistant polypropylene cabinet with stainless steel bowl, R18 insulation, 300W heating element.
Water Troughs: Stainless steel tip troughs from 48" to 144" lengths, capacities 21-38 gallons at 7" depth.
Aqua Bowl Heated Watering Bowl: Heavy gauge poly, convection heating to prevent freezing down to -40ºC, suitable for indoor/outdoor use.

2. Features and Specifications

Heated Waterers: Double wall with 2" foam insulation (R15-R18), thermostatic heating (300W or 500W), pilot light indicator (except P50), flow rates up to 5.5 GPM at 30 PSI, validated energy efficiency.
Single Head Waterer: 12.37 liters capacity, stainless steel, float-controlled flow, easy cleaning.
Poly Waterer: R18 insulation, UV resistant cabinet, 300W heating, waters 50 cattle or 200 sheep, easy installation with hinged electrical box.
Water Troughs: Tip trough design for easy cleaning, sizes 4-8 ft, capacities 21-38 gallons, hi-flo float system with steel guard to prevent animal interference.
Aqua Bowl: Double walled poly, convection heating, thermostat maintains 3ºC-15ºC, sealed electrical components, power consumption 0.92 amps at 70W.

3. Installation and Maintenance

Heated and poly waterers feature hinged bowls and accessible control covers for cleaning.
Aqua Bowl installation requires burying galvanized culvert below frost line with insulated water and electric lines; indoor mounting uses brackets.
Maintenance facilitated by side access plates and removable protector plates for inspection and cleaning.

4. Warranty and Support

One-year warranty covering material and workmanship defects.
Excludes labor and transportation costs for removal/reinstallation.
Void if altered, abused, neglected, or improperly operated.
Prior authorization required for claims.

5. Assembly Components for Tip Troughs

Includes stainless steel tip troughs, galvanized mounting brackets (floor and wall), handles, cover plates, bolts, nuts, and float guards.
Available in lengths up to 144" with corresponding hardware.

6. Replacement Parts and Valve Assemblies

Tip trough capacities: 10 ft = 46 gallons, 12 ft = 55 gallons at 7" depth.
Float valves available in 8, 13, and 21 GPM flow rates; plastic and heavy-duty brass options.
Key parts include float guards, wall mount supports, float balls, link arms, adapters, and valve assemblies designed for easy replacement.
Heated waterer components include replacement bowls (with/without heating), thermostats, fuse holders, pilot lights, control boxes, and water supply fittings.

7. Valve Assembly Evolution and Performance

2001: Post-1994 valve required upgrades for high water pressure.
2003: Alternate valve introduced for high PSI but less effective at low PSI.
2005: Updated plastic float used with post-1994 valve for low PSI.
2006: Redesigned valve with improved sealing and larger orifice became standard.
2009: High flow valve (12 GPM at 30 PSI) added for H200, retrofittable to older models.
Current default valve: Part #H0-P4300 (5.5 GPM at 30 PSI).

8. Ordering Guidelines

Specify trough length when ordering.
Specify fill system type: standard plastic float valve (13 GPM) or heavy-duty brass float valve (21 GPM).

9. Manufacturer and Contact Information

CANARM LTD.
Corporate Office: 2157 Parkedale Ave., Brockville, ON, Canada K6V 5V6
Tel: (613) 342-5424 | Fax: 1-800-263-4598
USA Warehouse: 808 Commerce Park Drive, Ogdensburg, NY, USA 13669
Tel: 1-800-267-4427 | Fax: 1-800-263-4598
Website: www.canarm.com
Email: [email protected]

10. Critical Notes and Best Practices

When threading float onto rod, a snug fit is sufficient; avoid puncturing the float as it self-threads.
Older valve assemblies are obsolete; upgrading to current valves (#H0-P4300 or #H0-P4305HF) is recommended.
Replacement parts may change; verify part numbers and compatibility before ordering.
Energy efficiency and insulation reduce winter energy costs significantly.
Materials like stainless steel and polypropylene ensure durability, corrosion resistance, and hygiene.
Float valve systems prevent animal interference and maintain consistent water supply.
Aqua Bowl convection heating prevents freezing even in extreme cold.
Installation must consider frost line depth and protect electrical and water lines properly.
Warranty is limited to one year and requires compliance with operational guidelines.

Summary

This document serves as a comprehensive technical guide for Canarm Ltd.'s livestock watering products, detailing specifications, installation, maintenance, warranty, replacement parts, and valve evolution to ensure optimal performance, durability, and energy efficiency in various livestock watering applications.

Catalog excerpts

WCANARM AgSystems™ WATERER OPTIONS PUTTING INNOVATION TO WORK r WATER TROUGH Available in stainless steel sizes 48” - 96” HEATED LIVESTOCK WATERER Available models: H50, HL50, H100, H200 POLY WATERER Model: HLW-P50 AQUA BOWL Provides fresh water year around including below freezing temperatures SSH20 SINGLE HEAD 5 Ml WATERER V Single head waterer for calves and cows CANARM LTD. - Corporate Office 2157 Parkedale Ave., Brockville, ON Canada K6V 5V6 Tel: (613) 342-5424 Fax: 1-800-263-4598 CANARM LTD. - USA Warehouse 808 Commerce Park Drive Ogdensburg, New York, USA 13669 Tel: 1-800-267-4427 Fax: 1-800-263-4598 E-Mail: [email protected] Subject to Change without notice.

Open the catalog to page 1

PUTTING INNOVATION TO WORK WATER TROUGHS Recent studies have shown that there is less bacterial growth on stainless steel water tanks. All your cows should have access to fresh water after being milked to maximize water intake. With Canarm AgSystem’s tip trough your cows can have easy access to clean drinking water to keep them healthier and give more milk. FEATURES • Tip the trough to keep your cows water supply clean. • Protect your equipment investment by choosing our high quality, durable heavy gauge troughs. • Available in 4, 6, & 8 FT stainless steel troughs. If you need a tip trough of...

Open the catalog to page 2

SSH20 SINGLE HEAD WATERER PUTTING INNOVATION TO WORK SINGLE HEAD WATERER FOR CALVES AND COWS An innovative new product – part of Canarm’s water source solution. FEATURES • Suitable for all age groups. • Float controlled water flow. • Made from durable stainless steel. • Easy to clean – will not harbor bacteria. • An easy way to provide multiple watering locations. throughout the barn and at the feed bunk. • Universal mount. • Max water volume: 12.37 liters or 3.266 gallons. CANARM LTD. - Corporate Office 2157 Parkedale Ave., Brockville, ON Canada K6V 5V6 Tel: (613) 342-5424 Fax: 1-800-263-4598...

Open the catalog to page 3

PUTTING INNOVATION TO WORK HEATED LIVESTOCK WATERERS Canarm’s Energy Efficient Heated Livestock Waterers are designed for both durability and ease of use. 2” INSULATION (R15) FLOAT & VALVE ASSEMBLY Our strong, double wall design, combined with 2” of injected polyurethane foam insulation,gives an R15 insulation value, one of the highest in the industry. The new Poly option for the 50 head waterer has a R18 insulation value! Based on PAMI testing our HL50 and H100 were rated #1 for energy savings. The energy cost for the winter season on our HL50 model proved to be almost 3 times more efficient...

Open the catalog to page 4

Vcuttjnr POLY WATERERS PUTTING INNOVATION TO WORK HLW-P50 HEATED POLY WATERER • Durable poly cabinet resists corrosion for years of service. • Stainless steel top and poly cabinet will never rust. • Comes with seamless stainless bowl. • Stainless steel bowl construction ensures long life, and eliminates the risk of chipping paint and rust contamination. • Thicker cabinet wall for a superior R value (R18). • Mounting corners molded inside the cabinet make for easy installation and removal. • Bowl has rounded corners that provide a durable yet smooth surface that is gentle on animals. • Comes with...

Open the catalog to page 5

PUTTING INNOVATION TO WORK Provides continuous fresh water all winter and summer. Designed especially for below freezing conditions. The Aqua Bowl is a rugged, reliable waterer designed to keep your cows hydrated in harsh conditions, including below freezing temperatures. It keeps water circulating to prevent it from freezing while saving energy. FEATURES • Fully equipped with a heater, thermostat, infeed line heating wire and reliable float valve. • It is sized to adequately water cows in groups in the field or individually in stalls. • The font replenishes quickly, thus eliminating icing. •...

Open the catalog to page 6

PUTTING INNOVATION TO WORK AQUA BOWL HEATED LIVESTOCK WATERING BOWL BOWL Made of double walled, heavy gauge, non-toxic poly. Won’t crack in freezing conditions. No sharp edges. It replenishes often to keep the water fresh. POSITIVE ACTION FLOAT VALVE ASSEMBLY Firmly attaches water line to float valve. Valve is adjustable. It is easy to access and is made of durable plastic with positive stop valve. PROTECTOR PLATE Secure enough that cows can’t budge it, but easily slides out by hand for bowl cleaning and inspection. SIDE ACCESS PLATE Unscrews for ease of servicing. ELECTRICAL COMPONENTS THERMOSTAT,...

Open the catalog to page 7

^CANARMAgSystems™ PUTTING INNOVATION TO WORK Subject to Change without notice. Printed in Canada

Open the catalog to page 8

^CANARM"AgSystems" PUTTING INNOVATION TO WORK * CAPACITIES: 10 FT = 46 Gals at recommended 7” water depth 12 FT = 55 Gals at recommended 7” water depth Subject to Change without notice. Printed in Canada

Open the catalog to page 9

PUTTING INNOVATION TO WORK TIP TROUGH REPLACEMENT PARTS PLASTIC FLOAT VALVE (13 GPM) 3/4" BRASS FLOAT VALVE (21 GPM) 4” FLOAT BALL FOR 1500201 VALVE 5” FLOAT BALL FOR 1600125 VALVE Subject to Change without notice.

Open the catalog to page 10

VALVE ASSEMBLY PUTTING INNOVATION TO WORK 1500100 PLASTIC FLOAT VALVE (13 GALLONS / MIN) + HDW 1500110 1500120 HD BRASS FLOAT VALVE (21 GALLONS/MIN) + HDW 1500122 1600125 1600129-3 WHEN THREADING FLOAT ON SNUG FIT WILL DO AS NOT TO PUNCTURE FLOAT. NO THREADS ON FLOAT BUT WILL THREAD ITSELF UPON TURNING ON TO ROD. Subject to Change without notice.

Open the catalog to page 11

PUTTING INNOVATION TO WORK GENERAL COMPONENTS H0-G1820-LW50 BOWL WELDED ASSEMBLY INCLUDES 120V 300W ELEMENT H0-G4920-H100-09R (H100 Model), H0-G4920-H50-09R (H50 HLW-P50 Model), H0-G4920-H200R (H200 Model) BOWL WELDED ASSEMBLY NO ELEMENT HO-P4814-H100, HO-P4814-H50 HO-P4814-H100 + HO-P4814-H50 (H200 USES ONE OF EACH ELEMENT WITH LEAD WIRES H0-G4950-H100, H0-G4950-H50 (Post 93) REPLACEMENT BOWL & FLOAT COVER KIT (Replaces Models H0-G4920-H100R and H0-G4920-H50R) ELECTRICAL COMPONENTS LECTRICAL COMPONENTS H0-G4952 (H & HL MODELS) H0-G1809 (LW MODEL) PREWIRED CONTROL BOX ASSEMBLY H0544 PILOT LIGHT...

Open the catalog to page 12