*myagriexpo

C200

Product catalog summary

Overview: The document provides technical specifications and features of the C200 Microturbine by Capstone Turbine Corporation, designed to deliver 200kW of clean and reliable power with ultra-low emissions.

Specifications:

Electrical Output: 200kW
Voltage: 400/480 VAC
Service: 3-Phase, 4 Wire Wye
Frequency: 50/60 Hz
Efficiency: 33% LHV
NOx Emissions: < 9 ppmvd (18 mg/m3) at 15% O2
Exhaust Mass Flow: 1.3 kg/s (2.9 lbm/s)
Exhaust Gas Temperature: 280°C (535°F)
Natural Gas HHV: 30.7–47.5 MJ/m3 (825–1,275 BTU/scf)
Inlet Pressure: 517–551 kPa gauge (75–80 psig)
Fuel Flow HHV: 2,400 MJ/hr (2,280,000 BTU/hr)
Net Heat Rate LHV: 10.9 MJ/kWh (10,300 BTU/kWh)

Design and Features:

World’s largest air-bearing microturbine with minimal maintenance due to one moving part.
Patented air bearings eliminate the need for lubricating oil or coolant.
Integrated utility synchronization without external switchgear.
Compact modular design for easy and low-cost installation.
Multiple units can be combined to act as a single generating source.
Remote monitoring and diagnostic capabilities.
Proven technology with extensive operational hours.

Dimensions & Weight:

Dimensions (W x D x H): 1.7 x 3.8 x 2.5 m (67 x 151 x 98 in)
Weight - Grid Connect Model: 2,776 kg (6,120 lbs)
Weight - Dual Mode Model: 3,413 kg (7,525 lbs)

Clearance Requirements:

Horizontal Clearance: Left & Right 1.1 m (42 in), Front - Grid Connect Model 1.1 m (42 in), Front - Dual Mode Model 1.5 m (60 in), Rear 1.8 m (70 in)

Certifications:

UL 2200 Listed
CE Certified
Certified to grid interconnection standards: UL 1741, VDE, BDEW, and CEI -16
Compliant with California Rule 21

Engine Components: Includes exhaust outlet, recuperator, compressor, combustion chamber, recuperator housing, turbine, generator, and air bearings.

Catalog excerpts

C200 MicroturbineHigh-pressure Natural GasWorld's largest air-bearing microturbine produces 200kW of clean, green, and reliable power. o Ultra-low emissions o One moving part - minimal maintenance and downtime o Patented air bearings - no lubricating oil or coolant o Integrated utility synchronization - no external switchgear o Compact modular design allows for easy, low-cost installation o Multiple units easily combined - act as single generating source o Remote monitoring and diagnostic capabilities o Proven technology with tens of millions of operating hours o Various Factory Protection Plans available Electrical Performance^ Reliable power when and where you need it. Clean and simple.

Open the catalog to page 1

Horizontal Clearance Certifications • UL 2200 Listed • CE Certified • Certified to the following grid interconnection standards: UL 1741, VDE, BDEW and CEI-16 • Compliant to California Rule 21 C200 Engine Components Exhaust Outlet Generator h Recuperator h Compressor h Combustion Chamber h Recuperator Housing h Turbine (1) Nominal full power performance at ISO conditions: 15°C (59°F), 14.696 psia, 60% RH (2) Approximate dimensions and weights (3) Height dimensions are to the roofline. Exhaust outlet extends at least 203 mm (8 in) above the roofline (4) Clearance requirements may increase...

Open the catalog to page 2

C200

C200

Catalog excerpts

All Capstone catalogs and technical brochures