C200S Power Package

Product catalog summary

Overview: The document provides technical specifications and features of the Signature Series Microturbine, specifically the C200S Power Package, designed for reliable electrical and thermal generation using natural gas with ultra-low emissions.

Specifications:

Electrical Output: 200kW
Voltage: 400/480 VAC
Service: 3-Phase, 4 Wire Wye
Frequency: 50/60 Hz
Efficiency: 33% LHV
NOx Emissions: < 9 ppmvd (18 mg/m3) at 15% O2
Exhaust Mass Flow: 1.3 kg/s (2.9 lbm/s)
Exhaust Gas Temperature: 280°C (535°F)
Natural Gas HHV: 30.7–47.5 MJ/m3 (825–1,275 BTU/scf)
Inlet Pressure: 517–551 kPa gauge (75–80 psig)
Fuel Flow HHV: 2,400 MJ/hr (2,280,000 BTU/hr)
Net Heat Rate LHV: 10.9 MJ/kWh (10,300 BTU/kWh)

Design and Features:

Ultra-low emissions with one moving part for minimal maintenance.
Patented air bearings eliminate the need for lubricating oil or coolant.
Integrated utility synchronization without external switchgear.
Compact modular design for easy, low-cost installation.
Capability to combine multiple units as a single generating source.
Remote monitoring and diagnostic capabilities.
Proven technology with extensive operational hours.
Various Factory Protection Plans available.

Dimensions & Weight:

Dimensions: 3.0 x 2.5 x 3.8 m (117 x 100 x 148 in)
Weight - Grid Connect Model: 6,000 kg (13,200 lbs)
Weight - Dual Mode Model: 6,700 kg (14,700 lbs)

Certifications:

UL 2200 Listed
CE Certified
Certified to grid interconnection standards: UL 1741, VDE, BDEW, CEI 0-16
Compliant with California Rule 21

Components:

Exhaust Outlet
Recuperator
Compressor
Combustion Chamber
Recuperator Housing
Turbine
Generator
Air Bearings

Heat Recovery:

Hot Water Heat Recovery: 300 kW (1.0 MMBtu/hr)

Additional Information: The document notes that specifications are subject to change without notice and provides contact information for Capstone Turbine Corporation.

Catalog excerpts

C200S Power PackageHigh-pressure Natural Gas, ICHPThe Signature Series Microturbine provides reliable electrical/thermal generation from natural gas with ultra-low emissions. o Ultra-low emissions o One moving part - minimal maintenance and downtime o Patented air bearings - no lubricating oil or coolant o Integrated utility synchronization - no external switchgear o Compact modular design allows for easy, low-cost installation o Multiple units easily combined - act as single generating source o Remote monitoring and diagnostic capabilities o Proven technology with tens of millions of operating hours o Various Factory Protection Plans available Electrical Performance^ Reliable power when and where you need it. Clean and simple.

Open the catalog to page 1

Horizontal Clearance ICHP Heat Recovery15’ Hot Water Heat Recovery 300 kW (1.0 MMBtu/hr)Certifications• UL 2200 Listed• CE Certified• Certified to the following grid interconnection standards: UL 1741, VDE, BDEW and CEI 0-16 • Compliant to California Rule 21 C200 Engine Components Exhaust Outlet Generator h Recuperator h Compressor h Combustion Chamber h Recuperator Housing h Turbine (1) Nominal full power performance at ISO conditions: 15°C (59°F), 14.696 psia, 60% RH (2) Approximate dimensions and weights (3) Height dimensions are to the roofline. Exhaust outlet extends at least...

Open the catalog to page 2

C200S Power Package

C200S Power Package

Catalog excerpts

All Capstone catalogs and technical brochures