C30

C30

C30

Product catalog summary
Overview: The document provides technical specifications and features of the C30 Microturbine, designed for reliable and clean electrical generation using natural gas.
Specifications:
  • Electrical Output: 30kW
  • Voltage: 400/480 VAC
  • Service: 3-Phase, 4 Wire Wye
  • Frequency: 50/60 Hz
  • Efficiency: 26% LHV
  • NOx Emissions: < 9 ppmvd (18 mg/m3) at 15% O2
  • Exhaust Mass Flow: 0.31 kg/s (0.69 lbm/s)
  • Exhaust Gas Temperature: 275°C (530°F)
  • Fuel: Natural Gas HHV 30.7–47.5 MJ/m3 (825–1,275 BTU/scf)
  • Inlet Pressure: 379–414 kPa gauge (55–60 psig)
  • Fuel Flow HHV: 457 MJ/hr (433,000 BTU/hr)
  • Net Heat Rate LHV: 13.8 MJ/kWh (13,100 BTU/kWh)
Dimensions & Weight:
  • Dimensions (WxDxH): 0.76 x 1.52 x 1.79 m (30 x 60 x 71 in)
  • Weight - Grid Connect Model: 405 kg (891 lb)
  • Weight - Dual Mode Model: 578 kg (1,271 lb)
Features:
  • Ultra-low emissions
  • Minimal maintenance with one moving part
  • Patented air bearings, eliminating the need for lubricating oil or coolant
  • Integrated utility synchronization without external switchgear
  • Compact modular design for easy installation
  • Capability to combine multiple units as a single generating source
  • Remote monitoring and diagnostic capabilities
  • Proven technology with extensive operational hours
  • Various Factory Protection Plans available
Certifications:
  • UL 2200 Listed
  • CE Certified
Acoustic Emissions: Nominal at Full Power at 10 m (33 ft) is 65 dBA.
Clearance Requirements:
  • Horizontal Clearance: Left & Right 0.76 m (30 in), Front 0.93 m (37 in), Rear 0.90 m (35 in)
Additional Notes: Specifications are subject to change without notice. Some utilities may require additional equipment for grid interconnectivity.
See more

Catalog excerpts

C30-1

C30 MicroturbineHigh-pressure Natural Gas Achieve ultra-low emissions and reliable electrical generation from natural gas. o Ultra-low emissions o One moving part - minimal maintenance and downtime o Patented air bearings - no lubricating oil or coolant o Integrated utility synchronization - no external switchgear(1) o Compact modular design allows for easy, low-cost installation o Multiple units easily combined - act as single generating source o Remote monitoring and diagnostic capabilities o Proven technology with tens of millions of operating hours o Various Factory Protection Plans available Electrical Performance® Reliable power when and where you need it. Clean and simple.

 Open the catalog to page 1
C30-2

Minimum Clearance Requirements(5) Horizontal Clearance Acoustic Emissions Nominal at Full Power at 10 m (33 ft) 65 dBA Certifications • UL 2200 Listed • CE Certified i Fuel Injector i Combustion Chamber Exhaust Outlet Compressor Generator Air Bearings Turbine (1) Some utilities may require additional equipment for grid interconnectivity (2) Nominal full power performance at ISO conditions: 15°C (59°F), 14.696 psia, 60% RH (3) Approximate dimensions and weights (4) Height dimensions are to the roofline. Exhaust stack extends at least 178 mm (7 in) above the roofline (5) Clearance requirements...

 Open the catalog to page 2

All Capstone catalogs and technical brochures

  1. C800S

    2  Pages

  2. C200

    2  Pages

  3. C65

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.