1. Catalogs
  2. Capstone
  3. C600S Power Package

C600S Power Package

C600S Power Package

C600S Power Package

Product catalog summary
Overview: The document provides technical specifications and features of the C600S Power Package by Capstone Turbine Corporation, designed for reliable and clean electrical and thermal generation using natural gas.
Specifications:
  • Electrical Power Output: 600kW
  • Voltage: 400/480 VAC
  • Electrical Service: 3-Phase, 4 Wire Wye
  • Frequency: 50/60 Hz
  • Electrical Efficiency LHV: 33%
  • NOx Emissions: < 9 ppmvd (18 mg/m3) at 15% O2
  • Exhaust Mass Flow: 4.0 kg/s (8.8 lbm/s)
  • Exhaust Gas Temperature: 280°C (535°F)
  • Natural Gas HHV: 30.7–47.5 MJ/m3 (825–1,275 BTU/scf)
  • Inlet Pressure: 517–551 kPa gauge (75–80 psig)
  • Fuel Flow HHV: 7,200 MJ/hr (6,840,000 BTU/hr)
  • Net Heat Rate LHV: 10.9 MJ/kWh (10,300 BTU/kWh)
Design and Features:
  • Ultra-low emissions with one moving part for minimal maintenance
  • Patented air bearings eliminating the need for lubricating oil or coolant
  • Integrated utility synchronization without external switchgear
  • Compact modular design for easy and low-cost installation
  • High electrical efficiency across a wide operating range
  • High availability with part load redundancy
  • Remote monitoring and diagnostic capabilities
  • Proven technology with extensive operational hours
  • Various Factory Protection Plans available
Dimensions and Weight:
  • Dimensions (Width x Depth x Height): 3.0 x 5.8 x 3.8 m (117 x 230 x 148 in)
  • Weight - Grid Connect Model, dry: 13,700 kg (30,000 lbs)
  • Weight - Dual Mode Model, dry: 15,800 kg (34,900 lbs)
Certifications:
  • UL 2200 Listed
  • CE Certified
  • Certified to grid interconnection standards: UL 1741, VDE, BDEW, CEI 0-16
  • Compliant with California Rule 21
Components:
  • Exhaust Outlet
  • Recuperator
  • Compressor
  • Combustion Chamber
  • Recuperator Housing
  • Turbine
  • Generator
  • Air Bearings
Heat Recovery:
  • Hot Water Heat Recovery: 0.9 MW (3.06 MMBtu/hr)
Additional Notes: Specifications are subject to change without notice. Clearance requirements may vary based on local codes.
See more

Catalog excerpts

C600S Power Package-1

C600S Power PackageHigh-pressure Natural Gas, ICHPThe Signature Series Microturbine provides ultra-low emissions and reliable electrical/thermal generation from natural gas. o Ultra-low emissions o One moving part - minimal maintenance and downtime o Patented air bearings - no lubricating oil or coolant o Integrated utility synchronization - no external switchgear o Compact modular design allows for easy, low-cost installation o High electrical efficiency over a very wide operating range o High availability - part load redundancy o Remote monitoring and diagnostic capabilities o Proven technology with tens of millions of operating hours o Various Factory Protection Plans available Electrical Performance^ Reliable power when and where you need it. Clean and simple.

 Open the catalog to page 1
C600S Power Package-2

h Recuperator h Compressor h Combustion Chamber Recuperator Housing (1) Nominal full power performance at ISO conditions: 15°C (59°F), 14.696 psia, 60% RH (2) Approximate dimensions and weights (3) Height dimensions are to the roofline. Exhaust outlet extends at least 236 mm (9.3 in) above the roofline (4) Clearance requirements may increase due to local code considerations (5) Total heat recovery using 3 Heat Recovery Modules (HRM). Inlet temperature of 38°C (100°F) and flow rate of 6.3 l/s (100 gpm) per HRM. Specifications are not warranted and are subject to change without notice. 21211 Nordhoff...

 Open the catalog to page 2

All Capstone catalogs and technical brochures

  1. C800S

    2  Pages

  2. C200

    2  Pages

  3. C65

    2  Pages

  4. C30

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.