C800S

C800S

C800S

Product catalog summary
Overview: The C800S Power Package is a high-efficiency, ultra-low emission microturbine designed to deliver 800kW of reliable electrical power. It features a compact, modular design for easy installation and maintenance.
Specifications:
  • Electrical Power Output: 800kW
  • Voltage: 400/480 VAC
  • Electrical Service: 3-Phase, 4 Wire Wye
  • Frequency: 50/60 Hz
  • Electrical Efficiency LHV: 33%
  • NOx Emissions @ 15% O2: < 9 ppmvd (18 mg/m3)
  • Exhaust Mass Flow: 5.3 kg/s (11.7 lbm/s)
  • Exhaust Gas Temperature: 280°C (535°F)
  • Natural Gas HHV: 30.7–47.5 MJ/m3 (825–1,275 BTU/scf)
  • Inlet Pressure: 517–551 kPa gauge (75–80 psig)
  • Fuel Flow HHV: 9,600 MJ/hr (9,120,000 BTU/hr)
  • Net Heat Rate LHV: 10.9 MJ/kWh (10,300 BTU/kWh)
Design and Features:
  • Ultra-low emissions with one moving part for minimal maintenance
  • Patented air bearings eliminate the need for lubricating oil or coolant
  • Integrated utility synchronization without external switchgear
  • High electrical efficiency across a wide operating range
  • Remote monitoring and diagnostic capabilities
  • Proven technology with extensive operational hours
Dimensions & Weight:
  • Dimensions (Width x Depth x Height): 3.0 x 7.5 x 2.9 m (117 x 295 x 114 in)
  • Weight - Grid Connect Model: 14,100 kg (31,100 lbs)
  • Weight - Dual Mode Model: 16,900 kg (37,300 lbs)
Certifications:
  • UL 2200 Listed
  • CE Certified
  • Certified to grid interconnection standards: UL 1741, VDE, BDEW, CEI 0-16
  • Compliant with California Rule 21
Clearance Requirements:
  • Left: 1.5 m (60 in)
  • Right: 0.0 m (0 in)
  • Front: 1.7 m (65 in)
  • Rear: 2.0 m (80 in)
Components: The C200 engine includes components such as the exhaust outlet, recuperator, compressor, combustion chamber, recuperator housing, turbine, generator, and air bearings.
See more

Catalog excerpts

C800S-1

C800S Power PackageHigh-pressure Natural GasThe Signature Series Microturbine provides 800kW of reliable electrical power in one small, ultra-low emission, and highly efficient package. o Ultra-low emissions o One moving part - minimal maintenance and downtime o Patented air bearings - no lubricating oil or coolant o Integrated utility synchronization - no external switchgear o Compact modular design allows for easy, low-cost installation o High electrical efficiency over a very wide operating range o High availability - part load redundancy o Remote monitoring and diagnostic capabilities o Proven technology with tens of millions of operating hours o Various Factory Protection Plans available Electrical Performance^ Reliable power when and where you need it. Clean and simple.

 Open the catalog to page 1
C800S-2

• CE Certified • Certified to the following grid interconnection standards: UL 1741, VDE, BDEW and CEI 0-16 • Compliant to California Rule 21 Exhaust Outlet Generator h Recuperator h Compressor h Combustion Chamber h Recuperator Housing h Turbine (1) Nominal full power performance at ISO conditions: 15°C (59°F), 14.696 psia, 60% RH (2) Approximate dimensions and weights (3) Height dimensions are to the roofline. Exhaust outlet extends at least 127 mm (5 in) above the roofline (4) Clearance requirements may increase due to local code considerations Specifications are not warranted and...

 Open the catalog to page 2

All Capstone catalogs and technical brochures

  1. C200

    2  Pages

  2. C65

    2  Pages

  3. C30

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.