TruFlex (Razor) Draper head Head of the class - no matter the crop

TruFlex / TruFlex Razor A truly precise yet gentle draper

Sensitive crops present a special challenge to today’s heads. Heads that cut almost at ground level make the difference, minimizing losses and ensuring consistent crop flows. The TruFlex (Razor) brings a new dimension to flotation cutting. Take your choice: TruFlex: 30ft draper belt head with true flexible cutterbar, a rigid frame and rigid reel TruFlex Razor:35ft or 40ft draper belt head with a true flexible cutterbar, threesection frame and three-section reel

Suitable for all types of crop

The TruFlex (Razor) draper head harvests all cereals, canola, soybean and special crops like peas, linseed, lupine and more, adapting perfectly to the field conditions of the individual crops.

Frame and bodywork Sturdy but lightweight design & depth control ► Three-piece frame on the 35ft and 40ft TruFlex Razor model ► Single-piece, rigid frame on the 30ft TruFlex model ► Lightweight design ► Depth wheels for optimum ground hugging

The lightweight Flip-Over reel is made from high-quality aluminum and designed for an unobstructed view of the middle of the head for perfect control and visibility. ► Three-piece reel on the 35ft and 40ft TruFlex Razor models ► Single-piece, rigid reel on the 30ft TruFlex model ► Optimum crop flow ► Low weight ► The design offers unobstructed view of the middle of the cutterbar.

The cutting system Leave nothing behind The flexible cutterbar allows you to cut nearly at ground level thanks to a system of sensors that are distributed across the full width. ► Superb driveline efficiency ► A dual drive unit is arranged in the middle as standard specification ► Short drivelines for less weight ► Easy knife replacement as part of the Schumacher cutting system

► The cutterbar can be rigid or flexible to meet different demands ► Cutting at ground level ► Flexible adaption to undulations and foreign objects ► Easy cleaning and maintenance ► Slim side panels

The crop flow and crop feed system Belts maximize the productivity The TruFlex (Razor) uses lightweight and robust belts instead of heavy augers. The belts feed the crop in a very consistent flow into the combine for better machine utilization, productivity and efficiency of your harvest campaign. Operators can vary the belt speed from the in-cab Geringhoff terminal to optimize the crop flow. of belt speed optimizes crop flow peak loads in the crop feed system work hours despite increasing moisture levels consistent crop feed boosts machine utiliz

Crop flow and crop feed A gentle but firm grip Unlike augers, belts cannot be misadjusted, which eliminates the risk of crop being thrown forward. The intelligent system eliminates the gap between the cutterbar and the auger and hence loss in this area. Cutting becomes gentler, more effective and more productive. The TruFlex (Razor) adapts easily and instantly to varying conditions. cradle weight treatment, less grain damage maximum throughputs

Air is blown in a consistent and controlled stream through slots just above the guards, carrying grains away and to the belt. The air flows from the slots in a controlled and consistent stream. Maximize your yields IAS: Integrated Air System Sensitive crops that tend to shed some of its mature seeds require harvesters with special technology to minimize such losses. The new and integral IAS air flow technology blows the shed seeds to the belt which feeds them to the threshing system.

for particularly sensitive and short-stemmed crops integrated system does not engage with the crop The unique Geringhoff TruFlex (Razor) Air system forms an integral part of the cutterbar instead of using exterior tubes that are routed in front of the reel where they would engage with the crop

The TruFlex (Razor) draper head is perfectly The following elements can be suited for harvesting canola along with ordered for harvesting canola: all cereals and soybean varieties. ► Auger ► Vertical knives Optimizes the crop flow The auger improves the crop flow in canola, long-stemmed grain and special crops (such as vetches, lupine, peas, etc.). Large 400 mm diameter auger and extra scrapers make it one of the most effective draper heads on the market.

Accessories & specifications

TF-TFR_EN_2019.01 Subject to change Some photos show optional specifications Instructions and settings are down to specific harvest conditions Carl Geringhoff Vertriebsgesellschaft mbH & Co. KG Porschestrasse 8 D-59227 Ahlen Germany Phone Number: +49 (0) 2382 9814 - 0 E-mail: [email protected] www.geringhoff.de