Axial-Flow 240 Series
48Pages

{{requestButtons}}

Catalog excerpts

Axial-Flow 240 Series - 3

Combines of the Case IH Axial-Flow® 240 series are high-performance specialists for European fields. Built for challenges associated with climate change, high-yielding crops and the need to become ever more efficient, Case IH Axial-Flow® combines are changing the landscape of harvesting-technology yet again. With their enhanced threshing technology and increased engine power, the new Axial-Flow® models provide solutions for today's and future challenges. STRIVING FOR PERFECTION The increased capacity on all models of the 240 series meets the demands of large modern farms and contract...

Open the catalog to page 3
Axial-Flow 240 Series - 4

TECHNOLOGY Case IH 240 series combines are built for the biggest farms, the largest contractors, the most demanding owners and operators, and the highest yields. They are developed and built for the lowest operating costs and utmost reliability – day after day, and season after season. At their heart is the proven Axial-Flow® single rotor technology, providing all the benefits associated with this concept such as thorough threshing, minimum losses and excellent grain quality due to the gentlest of grain handling. HARVEST YOUR CROP WITH A CASE IH HEADER 240 series combines can be operated...

Open the catalog to page 4
Axial-Flow 240 Series - 5

SAVE TIME IN LARGE FIELDS, UNLOAD ON THE GO With 240 series Axial-Flow® combines, you can put large quantities of clean, high quality grain into the grain tank fast. The new 8240 and 9240 models offer a larger than ever grain tank with an astounding 14,400 litres capacity, allowing to open up high yielding fields with large headers! When the tank is full, it can be unloaded rapidly, with a maximum unloading rate option of 144 litres/sec for the 8240 and 159 litres/sec for the 9240 models, respectively. CHOP OR WINDROW YOUR STRAW WITH THE INTEGRATED CHOPPER The combine’s pass is the first...

Open the catalog to page 5
Axial-Flow 240 Series - 6

Axial-Flow® combines and Case IH headers are the perfect match to maximize the combines’ output potential. Smooth harvesting under all conditions – that’s what the Axial-Flow® is built for. Our headers are designed to perform at their best in all yields, for maximum productivity and collecting all crop whichever way the harvesting conditions may change. Minimal losses, simple operation and excellent harvesting performance in all conditions. A smooth, fast and efficient intake means high threshing and separation rates are guaranteed. Mount the header in a matter of minutes with the single...

Open the catalog to page 6
Axial-Flow 240 Series - 7

SIMPLY ADVANCED - LARGE NEW HEADER FEATURES ■ New 12.5m effective cutting width header ■ Made for 12m controlled traffic farming operations ■ Dual wobble drive knife ■ Higher torque drivelines due to extra width ■ High durability and reliability ■ Single-piece reinforced reel for simplicity and reduced weight

Open the catalog to page 7
Axial-Flow 240 Series - 8

A WIDE RANGE OF HEADERS Benefit from the wide range header offering of Case IH. Case IH headers are designed to not only match today’s faster field speeds, tougher crop conditions and changing cropping practices, but take on tomorrow’s challenges as well. They are the perfect tool for ever-changing harvesting conditions, different stages of ripeness or during the day, of when harvesting in changing degrees of damp or dry crops conditions starting in the early morning and ending in the dark of night. Whatever the stage of crop or the time of day, the Case IH headers help save more crop and...

Open the catalog to page 8
Axial-Flow 240 Series - 9

3100 DRAPER HEADER - RETAIN EVERY GRAIN The 3100 draper header is designed to easily handle high-speed harvesting in short straw conditions. Crop is conveyed gently across the draper floor and fed heads-first into the elevator. A smooth crop flow and grain saver belts ensure that the grain in the tank is of the highest quality. ■ Available working width from 6.1 to 12.5 m ■ High speed harvesting in short straw crops and rape seed without losses ■ Easy serviceability ■ Central knife drive for balanced performance 4000 CORN HEADER - NEW GENERATION Case IH 4000 series corn header offers...

Open the catalog to page 9
Axial-Flow 240 Series - 10

SINGLE ROTOR THRESHING FROM THE INVENTOR OF AXIAL-FLOW® Single rotor threshing and separation is a Case IH specialty. We unveiled the first self propelled combine range based solely on this system more than three decades ago, and such has been its success that it remains core to our combine range today. But while the principle has remained unchanged, with each range development, Case IH engineers have utilised the very latest technology available to meet future farming needs. Axial-Flow® 240 series combines benefit from that same forward thinking, and incorporate some of the very latest...

Open the catalog to page 10
Axial-Flow 240 Series - 11

FEEDER ■ Designed to operate headers tith a work widtch up to 14 m (45 ft) ■ Higher reliability and less servicing by using shaft drive instead of belts for the header ■ Large stone trap housing, easily cleaned from the left hand side ROTOR ■ Adapted for European conditions to handle large volumes of straw and grain, in all crops and various conditions ■ High quality grain is key benefit ■ Grain on grain threshing STRAW MANAGEMENT ■ Straw management of a combine sets the baseline for next year's crop. ■ Open the fields by chop and spread and then switch over to swath, using the in-cab...

Open the catalog to page 11
Axial-Flow 240 Series - 12

FROM THE INVENTOR OF AXIAL-FLOW® SINGLE ROTOR TECHNOLOGY NEW CONFIGURATION AXIAL-FLOW® ROTOR - CONFIGURED FOR EUROPE At the heart of every Case IH 240 series combine is the latest Small Tube rotor. It has been further developed to meet changing harvesting conditions. Tested in european fields to get to a perfectly satisfying result - high troughput, best grain and straw sample and no grain loss. The Small tube rotors of all combines are now configured with new rasp bar set-up. The rotor section covering the threshing concaves is equipped with a dedicated rasp bar arragement for earlier...

Open the catalog to page 12
Axial-Flow 240 Series - 13

Threshing and separation area Separation area

Open the catalog to page 13
Axial-Flow 240 Series - 15

GRAIN QUALITY THE CLEANING SYSTEM Axial-Flow® 240 series combines are designed to put large quantities of clean, undamaged grain in the tank – and fast. The cleaning system drives up grain quality and cuts down on grain losses, giving you a greater performance and higher productivity. elf-levelling cleaning system levels up to 12% S to increase capacity on hillsides ully-adjustable pre-sieve means adaptability F in all crops and conditions The Case IH Trisweep system efficiently rethreshes stubborn returns in the cleaning system. Sieves adjustable from the seat The Cross Flow cleaning...

Open the catalog to page 15

All CASE IH catalogs and technical brochures

  1. HAY AND FORAGE

    60 Pages

  2. MAXXUM®

    36 Pages

  3. VESTRUM™

    2 Pages

  4. LB436 HD

    8 Pages

  5. 2017 PUMA

    50 Pages

  6. OPTUM CVXDRIVE

    46 Pages

  7. QUADTRAC

    48 Pages

  8. MAXXUM

    50 Pages

  9. AXIAL-FLOW

    77 Pages

  10. Farmall A

    16 Pages

  11. Headers

    16 Pages

  12. 2015 PUMA

    36 Pages

  13. Farmall C

    24 Pages

  14. Luxxum

    19 Pages

  15. Loaders

    12 Pages

  16. Magnum

    44 Pages

Archived catalogs