*myagriexpo

Catalogs
CASE IH
VESTRUM™

VESTRUM™

Product catalog summary

Vestrum Series Tractor Specifications

Safety Notice: Always read the Operator’s Manual before operating any equipment. Inspect equipment before use and ensure it is functioning properly. Follow safety signs and use provided safety features. CNH Industrial America LLC reserves the right to make design improvements and specification changes without notice.

Models: Vestrum 100 and Vestrum 130, both available with ActiveDrive 8 and CVXDrive transmissions.

Operator Station: Cab only

Traction: MFD only

Engine: Tier 4 B/Final, 4-cylinder, turbocharged 4.5L FPT with a displacement of 273 cu. in. Engine horsepower is 100 for Vestrum 100 and 130 for Vestrum 130. PTO horsepower is 86 for Vestrum 100 and 112 for Vestrum 130. Emissions are treated with Selective Catalytic Reduction (SCR). The engine has 16 valves, a 200 amp alternator, and a 12-volt battery with 176 Ah and 1300 EN CCA.

Transmission/PTO: Two options are available: (A) 24 x 24 ActiveDrive 8 dual-clutch transmission with a speed of 25 MPH (40 KPH), and (B) CVXDrive CVT transmission with the same speed. A creeper option is available on the ActiveDrive 8 transmission. The PTO is interchangeable with 540/540E/1000 rpm.

Axles: Front axle is Class 1.75 with an electro-hydraulic diff lock. The rear axle is flange type.

Hydraulics/Hitch: The system uses a closed center load sensing pump. Standard rear remotes include 2 mechanical and 1 electronic, with an optional configuration of 2 mechanical and 2 electronic. The hydraulic pump flow is 28.5 gal./min. (108 L/min). The 3-point hitch category is EDC with lower link sensing, with optional Cat II flex link ends. The standard lift capacity is 6,700 lb. (3,039 kg) with dual 80 mm external rams.

Capacities: The fuel tank holds 47 gal. (180 L), and the diesel exhaust fluid tank holds 5 gal. (19 L).

Dimensions & Weights: The wheelbase is 98.1 in. (2,490 mm), overall length to end of lower links is 188.6 in. (4,784 mm), overall height is 111.70 in. (2,835 mm), and the tractor weight is 12,900 lb.

*Specifications are at 2,200 ERPM rated engine speed.

Catalog excerpts

SERIES TRACTOR SPECIFICATIONS

Open the catalog to page 1

VESTRUM SERIES TRACTOR SPECIFICATIONS MODEL Operator Station ENGINE Type Tier 4 B/Final with 4 cylinder, turbocharged 4.5L FPT Emissions Treatment Number of Valves Alternator Battery Selective Catalytic Reduction (SCR) 16 200 amp 12 volt - 176 Ah 1300 EN CCA 24 x 24 ActiveDrive 8 dual-clutch transmission 25 MPH (40 KPH) Optional on ActiveDrive 8 transmission 540/540E/1000 rpm Interchangable PTO shaft AXLES Front Class 1.75 front axle with Electo hydraulic diff lock HYDRAULICS/HITCH Type Rear Remotes (Standard/Optional) Hydraulic Pump/Flow 3-Point Hitch Category (Standard/Optional) Standard Lift...

Open the catalog to page 2

All CASE IH catalogs and technical brochures

Archived catalogs

Optum Series Tractors Spec Sheet
2 Pages