TECHNOLOGY FOR ROW CULTURES
52Pages

FOR SUCCESSFUL VINEYARD MANAGEMENT SUBSOILING CULTIVATING WEED CONTROL FERTILIZING STEM CLEANING HEDGING DEFOLIATING PLANT PROTECTION PRE-PRUNING SHOOT BINDING 50° n Br. - The vineyards at the 50th parallel north in Wittlich

RADIUS SL AROUND-THE-VINE WEEDER is the environmentally friendly alternative to chemical weed control. The weeds rot in a natural manner. Less drought stress through destruction of the capillaries. Soil activation and promotion of optimum soil condition. Sensitive sensor technology for clean work around the vine. Rear, midand front mounting possible, 1 or 2 sided ver- sions. Versatility through different tools in front of the blade and additional devices. TECHNICAL DATA: Oil requirement RADIUS SL: 6 – 10 l/min With rotary tiller/device: 21 – 25 l/min Working depth: 50 – 100 mm Working...

RADIUS SL+ AROUND-THE-VINE WEEDER The RADIUS SL PLUS (i.e. transition/ changeover shaft) uses the approved technology based on the RADIUS SL. In addition, the supplement of springs and the replacement of the shaft allow the installation of various attachments. For all attached tools the triggering off takes place through a sensor rod. With the help of adapters, the following attachments are quickly installed: - RADIUS BLADE This feature should be used when no additional attachments are required in the area to be worked. - RADIUS BLADE in combination with a rotary cultivator With this...

HYDRAULICLY DRIVEN DISCS: The discs ( 2 pcs.) are used to pull out soil of the vine interspace, for ploughing back or to ridge, for example for a better placement of slurry and dung. In addition to the sensor rod, the disc unit is equipped with a deflecting rail, which pushes the unit away from the vine in case the sensor rod is not triggered, thus preventing injuries and damages to the plant. ROTARY CULTIVATOR: We recommand to use the rotary cultivator in combination with the blade. First the soil is broken up by the blade and subsequently divided by the rotary cultivator and also cleared...

MOWER: The mower (Ø 400 mm) pivots hydraulically between the vines, there to mulch the vegetation with two knife blades. A protecting ring around the support disk prevents the vine from being damaged. TECHNICAL DATA: MOVER Oil requirement max.: 20 Liter Weight: 38,5 kg

COMPACT LIFTER: Very compact lifter to protect the grape zone. Lifting height 300 mm SIDE SLOPE CORRECTION: With the slide slope correction you can change the angle of the RADIUS to adapt the position perfectly to the condition in slopes. You can choose between hydraulic or mechanical versions. This unit can be mounted on the tool carriers HEXAGON & SB Frames and also on the column lifters S2R and S5. SOIL & STONE DEFLECTOR: The soil & stone deflector is mounted behind the RADIUS to keep the cover crop clean of soil and stones. It comes with a parallelogram for ground adaptation. Different...

SENSING SHARE To mount on the blade 370 / 500 / 620mm CLEARING SHARE AND PIVOTING CLOD BREAKER To mount on the blade 370 / 500 / 620 mm ROTARY TILLER Oil requirement: max. 15 Liter Working width: 300 mm

GSP DISC Ø 450 mm: - simple operation for weeding under the vines - can be adapted to any soil type - high driving speed - long-term weed control can be achieved by mulching - even water consumption because the capillaries are broken - reduces most if not all herbicide

FINGER ROLLER FINGER ROLLER: Integrated angle adjustment as is also the case with the disc harrow. The exterior angle can also be altered with no problems by reinserting the locking pins. Good distribution of force due to the different disc dimensions for the exterior and interior sprockets. As a result, both discs work in a sloped working angle at the same level. In comparison to the disc, we avoid creating a clear edge which can become a water channel on a steep slope. TECHNICAL DATA: Disc thickness: 8 mm Forward speed: between 7 and 8 km/h Diameter external disc: 400 mm Diameter internal...

FINGER HOE Ø 370, 540, 700 mm: In particular for young plantations or in existing plantations with very crooked stems in which more safety from the sensor is required, the finger hoe works directly around the plant and breaks up the island (also TECHNICAL DATA: Diameter 370 mm Colour: green Stiffness: hard called the shadow) to gently remove the soil and weeds directly around the vine. Due to the special rubber compound, we work gently and with low wear. NOTE: In sandy soil, the finger hoe can also be used as an individual device. This is not possible in harder condi- tions. The finger hoes...

The mulching brush has very strong and smooth cords that protect the vine. The conical aluminum shaft operates smoothly and with little vibration because of its special shape. It is therefore possible to carry out weeding effectively at 1100 rpm. With the MULTICLEAN you can remove both the vine buds and the weeds simultaneaously with one machine. TECHNICAL DATA: Weight, kg: Dimensions mm: L x W x H: Rotary speed, rpm: Cleaning height: Slope: Oil requirements, l/Min: - single sided - double sided 6 - 24 Minimum 30 - two lines LTICLEAN MU

A FRAMES TOOL CARRIER

A FRAME: The A Frame is a tool carrier frame with mechanical width adjustment to attach the CLEMENS RADIUS SL for working light soil, MULTICLEAN for weed control or the ROTARY BRUSH for cleaning out the suckers. The frame is mountable in front or rear. The frames are available in two different sizes (AR1 and AR2) for row working widths from 1.40 to 2.90 meters. TECHNICAL DATA: Weight (kg), frame only Frame width (mm) For row working widths with RADIUS blade (mm)

SB FRAMES TOOL CARRIER SB COMPACT SB2 WITH OSCILLATING 3-POINT FRAME

SB COMPACT, SB 2 Light implement frames with hydraulic width adjustment for undervine cultivation for tractor mounting in front or rear. A pump tank hydrau- lic unit is available for smaller tractors. Ideal for mounting the modern undervine weeding system RADIUS SL or ROTARY BRUSH. SB COMPACT and SB2 are available in two different widths for cultivating rows from1.30 to 3.20 m, with extensions up to 3.60 m - depending on the tools. TECHNICAL DATA: Weight (kg), frame only Adjustment (mm) Frame width (mm) For row working widths with RADIUS blade (mm) 370 500 620