CCM
CCM
- Customizable control strategies for HVAC and thermal management systems.
- Capability to manage customer-specific systems upon request.
- High/low side load control up to 500mA with diagnostics.
- Communication via CAN-Bus and LIN, with various protocol support and configurations.
- Multiple PWM signal generation for driving specific equipment.
- Operating voltage range: 9-32VDC.
- Operating temperature range: -40°C to 85°C; storage range: -40°C to 90°C.
- Dust/water resistance rated at IP4X.
- Electromagnetic compatibility as per UNECE Regulation No.10.
- Low power consumption up to 100uA at 24V in sleep mode.
- 12 digital outputs with diagnostics.
- 12 analog inputs (10-bit).
- 3 digital inputs.
- 2 linear or PWM outputs with feedback.
- 1 CAN BUS and 1 LIN BUS (master or slave).
- Additional CAN and LIN BUS, digital inputs, and PWM outputs available upon request.
- Adaptable application firmware for different systems.
- UDS-compliant bootloader and protocol adaptations available.
- Based on 32-bit Arm® Cortex®-M4F S32K14 MCU with 512KB flash memory.
- Security options like seed/key authentication available.
- Customized tooling for flashing application firmware via CAN BUS.
- Diagnostic CAN BUS interface with monitoring capabilities.
- Optional AUTOSAR© BSW and XCP protocol compliance.
Catalog excerpts
COMES Control Module COMES ELECTRONIC CLIMATE CONTROL
Open the catalog to page 1
The CCM is a unique product that combines a wide range of customization possibilities with the latest technology on the market. This device could control either the HVAC system or the complete thermal management system, including batteries and electrical engine. The available versions range from the standard configuration to the full automotive one. This device allows you to manage the following aspects: • To control the HVAC/Thermal Management systems with fully customizable strategies and algorithms; • To control customer specific systems, upon request; • To control loads in high/low side up...
Open the catalog to page 2
ADDITIONAL FEATURES: • • • • • • • • Application FW adaptable to different systems, fully parametrized and customizable for HVAC or customer equipment UDS-compliant bootloader if required, adaptations on protocol if required Based on the 32-bit Arm® Cortex®-M4F S32K14 MCU 512KB Program Flash Memory Security options available as seed/key authentication, upon request Customized COMES tooling for flashing application FW onto ECU via CAN BUS and USB-CAN BUS adapter Specific customer interface with security access available upon request Customized and adaptable diagnostic CAN BUS interface, graphics...
Open the catalog to page 3
COMES Electronic Climate Control Via Don Fracassi 25/27 20008 Bareggio – Milano – Italy
Open the catalog to page 4
