A Series GNSS Receiver A100Series Smart AntennaADVANCED TRACKING CAPABILITY 132 mm The A100 Series GNSS Smart Antenna combines a GNSS board and high-quality antenna in a compact and durable enclosure. Based on SinoGNSS K8 platform, the A100 has 965 channels, tracking all running and planned constellations, including GPS, BDS, GLONASS, Galileo, QZSS and IRNSS. EASY INSTALLATION As a waterproof and dustproof device complying with IP67, the A100 is suitable for harsh environments. Being only 750g and palm-sized, A100 Series are easy to install, making it ideal for precision agriculture, machine control, UGV, intelligent transportation, land survey and other industries. Full-constellation and muti-frequency Advanced DP-Filter Smooth Function IP67 waterproof and dustproof Support 4G/Bluetooth ADVANCED DP-FILTER PERFORMANCE ComNav Technology's DP-filter performance can reach under 20cm pass-to-pass accuracy and good smooth performance in open environment. This can meet the requirement of some projects which needs high relative position precision and smooth performance, such as guidance system in agriculture. DP-filter can also get the better smooth performance than the competitor in shelter environment, shows the advantage for resisting shelter environment. Optional IMU for A100Pro allows automatic tilt compensation, enabling smooth operation under variable terrain and environmental conditions. A100Pro is equipped with a built-in radio with a frequency range ranging from 410 to 470MHz., can achieve 5km communication in ideal situation. © 2023, ComNav Technology Ltd. All rights reserved.SinoGNSS'is the official trade mark of ComNav Technology Ltd., registered in People’s Republic of China, EU, USA and Canada. All other trademarks are the property of their respective owners. (May, 2023).

A Series GNSS Receiver Ver.2023.5.18 Power GNSS Receiver Specifications Receiver Type GNSS Smart Antenna Update Rate 10 Hz standard, 20 Hz optional Cold Start <20 s (Adding Acceleration Capture Module) Power Consumption 2.6 W Maximum Current Consumption <1 A Maximum Reverse Polarity Protection Yes Positioning Accuracy Inertial Measurement Unit (lMU) Single Baseline RTK 8mm+1ppm Horizontal Speed accuracy < 0.02 m/s (PDOP <4) Reacquisition Time < 1s (typical) Signal Capture Sensitivity -138dBm Physical Specification Power/Data Connector 14-pin Deutsch (3x full-duplex RS-232, Status Indications...