Venus Laser RTK GNSS Surveying System Ver.2024.03.25 Survey Master Compatible with most of Android devices Easier survey workflow via Wizard function Support up to 60° IMU tilt compensation Support all survey modes, including Static, PPK and RTK Support Surface Stake, Mapping Survey and etc. to serve various survey tasks Support CAD import and directly use for stake out operations Support Convert function from ComNavBinary raw file to RINEX IJJI Microsurvey FieldGenius ! Microsurvey FieldGenius | Signal Tracking - Bluetooth: 5.0 Dual-Mode Bluetooth NFC: NFC Fast Connection Interface: USB TYPE-C Performance Specification - Signal Re-acquisition: <1s Cold Start: <45s Hot start: <15 s RTK Initialization Time: <10s(Baseline<10km) Initialization reliability: >99% Data Update Rate: 1Hz, 2Hz, 5Hz, 10Hz, 20Hz Environmental Specification - Working Temperature: -20'C~+60'C Storage Temperature: -30C~+70C Humidity: 100% non-condensing Water- & Dustproof: IP67 Shock: Survive a 2m drop onto the concrete Vibration: MIL-STD-810G Method 514.6 procedure I Mode Static and Fast Static Single Baseline RTK DGPS SBAS Standalone Accuracy Horizontal 2.5 mm + 0.5 ppm RMS Vertical 5 mm + 0.5 ppm RmS Horizontal 8mm + 1ppm RMS Vertical 15mm + 1ppm RMS <0.4m RMS Horizontal 0.5 RMS Vertical 0.8 RMS 1.5m 3D RMS Physical Specification - Housing Material: Plastic Dimension: 80±1mm(L), 70±1mm(W), 150±1mm(H) Weight: 380g Range Pole Interface: M8 thread Laser Tilt Measurement <5.5cm (2m range, <60°Tilt in handheld mode) Laser Specification - Range: 10m Accuracy(room temperature): (3-5)mm + 1ppm Measuring Frequency: Classic Value: 3Hz Maximum Value: 5Hz Laser Injection Power: 0.9mW~1.5mW Working Temperature: -20C~+50C Storage Temperature: -30C~+60C Post-processing Software SinoGNSS Compass solution software Provide the complete GPS/GLONASS/BeiDou/GALILEO post-processing solution Support GNSS observation data in RINEX and ComNav Raw Binary Data format Support different post-processing in static and kinematic modes Output analysis reports in various formats (web format, DXF, TXT, KML) Data Format Correction data I/O: RTCM2.X, 3.X,CMR(GPSonly),CMR+(GPSonly) Position data output: - ASCII: NMEA-0183 GSV, RMC, HDT, GGA, GSA, ZDA, VTG, GST; PTNL, PJK; PTNL, AVR; PTNL, GGK -ComNav Binary update to 20 Hz Specifications subject to change without notice. Voltage: 5/9V Power Consumption: 1.45W Over Current Protection Voltage: 30V, VBUS 9.99V Charging Time: <4h(QC2.0) Working time: >20h Universe Series GNSS Receiver Supports DJI’s P4R data format. Processing results can be imported into photogrammetry and 3D modeling software directly LASER RTK - INNOVATION MAKES THE DIFFERENCE ComNav Technology Ltd. Building 2, No. 618 Chengliu Middle Road, 201801, Shanghai, China Q@0©DQ Web: www.comnavtech.com Email: [email protected] © 2024, ComNav Technology Ltd. All rights reserved. is the official trade mark of ComNav Technology Ltd., registered in People’s Republic of China, EU, USA and Canada. All other trademarks are the property of their respective owners. (March, 2024).

LASER DISTANCE METER ENABLES RODLESS SURVEY Innovatively equipped with a laser distance meter, Venus makes rod-free stakeout and measurement possible, greatly expanding the working scope. SATELLITE TRACKING R60 Data Collector 5.5 inch sunlight readable screen 1080P HD display Venus is an innovative GNSS receiver combined with laser and IMU. Laser distance meter makes rodless survey possible, enabling GNSS surveying beyond usual constraints. IMU achieves 60° tilt compensation in both traditional and laser modes, supports free calibration and 10-second initialization. Integrated the SinoGNSS K8...