Specifications:
The Straw Dust Extraction machines are available in two models: 1040-200 (Ø500) and 1050-200 (Ø600). They are painted in RAL 3001 red, suitable for indoor, non-corrosive environments, and resistant to water and oil within a temperature range of -15 to +60 degrees Celsius. The machines are prepared with an alkaline degreaser, a machine primer, and a coating paint. The custom tariff number is 84369900.

Machine Function:
These machines are designed for dust extraction from materials, sand extraction before briquetting, and straw screening/fragmentation. A small auger collects the screened material below the screen.

Standards:
The machines comply with DS/EN 60204-1:2006 for electrical equipment safety, DS/EN ISO 13850 for emergency stops, and DS/EN ISO 13849-1 for safety-related parts of control systems. They require cable installation method E.

Risk Assessment:
The machine cannot operate as a standalone unit and thus cannot be CE marked. Risk assessments are conducted following EN-ISO 13849-1 standards, covering mounting, operating, servicing, renovation, and scrapping/recycling.

Power Consumption:
Screw conveyer: 4.0 - 7.5 kW, Collecting conveyer: 0.55 kW.

Volume Capacity:
Model 1040-200: 4.1 m³/min at 75% filling, 2.8 m³/min at 50% filling, 1.7 m³/min at 30% filling.
Model 1050-200: 7.0 m³/min at 75% filling, 4.6 m³/min at 50% filling, 2.8 m³/min at 30% filling.

Dimensions and Weight:
Model Ø500: H=960 mm, W=620 mm, L=1.5 - 14 meters, Weight: 350 to 1660 kg.
Model Ø600: H=1100 mm, W=720 mm, L=1.5 - 14 meters.

Screening Sizes:
Dust and sand: Ø 2.0 mm, Ø 2.5 mm, Ø 3.0 mm, Ø 3.5 mm.
Pellet extraction: Ø 8 mm, Ø 10 mm, Ø 15 mm.

Risk Analysis Details:
1. Mounting: Lifting positions ensure balance and strength. Workplace assessment is required before mounting. (S2 F1 P1 c)
2. Operating: Requires closed filling and outtake devices. (S2 F1 P1 c)
3. Servicing: Lubrication positions are accessible from safe positions. (S1 F1 P1 a)
4. Renovation: Access cover for augers requires machine to be off and locked. (S2 F1 P1 c)
5. Scrapping/Recycling: Same considerations as mounting. (S2 F1 P1 c)