Machine Function
The Straw Conveyer BT 170 is designed with a chain and slat system for filling into devices like bale breakers or straw shredders. It has a minimum length of 5 meters, extendable up to 10 meters in 2.5-meter sections. Standard machine numbers are 1013-454 (5m), 1013-455 (7.5m), and 1013-456 (10m).

Specifications
- Paint: RAL 3001 red, suitable for indoor, non-corrosive environments, resistant to water and oil, withstanding temperatures from -15 to +60 degrees Celsius.
- Power Consumption: 2.2 kW
- Dimensions: Width = 1800 mm, Height = 850 mm, Length = 5000, 7500, or 10000 mm
- Weight: 500 kg to 1000 kg
- Custom Tariff Number: 84369900

Standards
The machine complies with several safety standards including DS/EN 60204-1:2006 for electrical equipment, DS/EN ISO 13850 for emergency stops, and DS/EN ISO 13849-1 for safety-related parts of control systems.

Risk Assessment
The machine is CE marked and includes an emergency stop wire along both sides. It poses no risk of dust explosion. Safety levels are PLr: a for standalone use and PLr: c with MTX_H or RBS.

Extra Equipment
- Weighing load cells (2 per section, minimum 4, maximum 8)
- Special fit legs
- Junction box for load cells
- Signal amplifier (24 Volt)

Risk Analysis
1. Mounting: Safe lifting positions are provided. Workplace assessment is recommended before mounting. (S2 F1 P1 c)
2. Operating: Risk of finger injury if hands are placed near the chain slat. Emergency wire available. (S1 F1 P1 a)
3. Servicing: Lubrication and chain tightening can be done safely. (S1 F1 P1 a)
4. Renovation: Machine must be turned off and locked during slat or chain changes. (S2 F1 P1 c)
5. Scrapping/Recycling: Same precautions as mounting. (S2 F1 P1 c)