Cross Agitators
4Pages

SA1 Agitator Pump The Cross SA1 Agitator is made entirely of 6" pipe for high output. This model of slurry pump is designed entirely for the farmer with only one tractor. It can be disconnected from while in the tank and a top link is not needed to attach to the agitator. Any tractor from 60Hp up can handle this machine due to the different ratio gearboxes proved by Cross Agricultural Engineering. All Cross Agitator Pumps cannot block with round bale silage due to the shear bar chopping unit fitted to the base of the pump. The range of Cross pumps are the highest output pumps on the market....

Cross Mixers SW1 Wall Mixer The Cross SW1 Mixer is a Tank Wall mixer. This model is used for mixing over ground tanks. It is fitted permanently in the tank wall and fixed to the ground. The machine is relatively easy to drive and 60 - 70 hp should have no problem mixing a full tank at 540 Rpm The Cross SW2 Lagoon Mixer is a high output machine for mixing large tanks of various sizes. This machine was developed for larger lagoons. The SW2 has a shear bar attached for cutting any materials that may become entangled in the shaft. The SW2 comes in various sizes and needs at least 120hp SW3...

Mega Mixer The Cross Mega Mixer is a high output lagoon mixer for mixing large tanks faster and more effectively. This mixer has a rotating jetter nozzle that can rotate 300° meaning you can do a lot more mixing from one point in the tank. The Mega Mixer has all 6" pipes for high output. You also have the option of using a top fill attachment on this machine for filling into other tanks if needs be. A trailer can also be purchased for moving this machine around to avoid large tail swing. This machine requires at least 140hp to operate. Cross Agricultural Engineering Ltd, Newtown,...