1. Catalogs
  2. DACS A/S
  3. MagFan Mini – 50 Hz Operation

MagFan Mini – 50 Hz Operation
1 /1Page

MagFan Mini – 50 Hz Operation

MagFan Mini – 50 Hz Operation
1 /1Page

Catalog excerpts

MagFan Mini – 50 Hz Operation-1

MagFan Mini – 50 Hz Operation +45 75771922 l [email protected] I www.dacs.dk MagFan Mini is a wall-mount fan, a downsized version of the MagFan but has the same quality characteristics. It is made with a focus on aerodynamic optimization and is highly energy efficient. Also it is easy to assemble, install and operate. With a diameter of 740 mm (30”) the capacity of 17  471 m³/hour (10  000 cfm) is significantly higher than that of other wall-mount fans with similar size fan motor. With a power consumption of 25.5 W/1  000 m³/h (15 cfm/Watt) at 0 Pascal, the consumption is also very low when compared to other similar size fans. MagFan Mini is a downsized MagFan and incorporates all the MagFan Trademarks: • Industry leading energy efficiency • Direct drive • Maintenance free Speed controlling MagFan Mini is equipped with a 0.3 kW high efficiency motor designed for speed controlling. With the optional MagDrive Variable Frequency Drive (VFD), variable speed mode further reduces power consumption and allows for a much more uniform and precise airflow. The fan can also be operated on/off. The MagFan Mini can be installed with a MagDoor. The MagDoor creates an airtight, insulated seal not found on any other shutter or damper on the market. The MagDoor is motorized and operates on a simple on/off signal. MagFan Mini Volume flow as a function of pressure and RPM TECHNICAL SPECIFICATIONS Motor 3×230V /3×400 V: Shaft output power: Volume flow @ 0 Pa: Specific consumption: Fan RPM: Materials:

 Open the catalog to page 1

All DACS A/S catalogs and technical brochures

  1. MagDoor

    1  Page

  2. MagFan - EN

    20  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.