DATA Bulk Tablet Counting Machines ICU SERIES • Vision-based counting modules • 100% counting accuracy • Can function in extreme dust conditions • Broken tablets detection • Rate of up to 90 bottles per minute • Can count 1 to ^ tablets into a bottle • Full GMP compliant design, no blind spots • Less than 5 minutes tool-less changeover of all contact parts • Small footprint, minimal maintenance • 21 CFR Part 11 compliance • Touch panel PC based HMI with intuitive graphic int • Recipe driven, multi-level user access • Very easy to operate and setup • Dust extraction Optional features: • Ionizer • Diving funnels • Change part for large counts • Ext

• Vision based count modules • 100% counting accuracy • Can function in extreme dust conditions • Broken tablets detection • Rate of up to 45 bottles per min • Can count 1 to ^ tablets into a bottle • Full GMP compliant design, no blind spots • Less than 5 minutes tool-less changeover of all contact parts • Small Footprint, minimal maintenance • 21 CFR Part 11 compliance • Touch panel PC based HMI with intuitive graphic interface • Recipe driven, multi level user access • Very easy to operate and setup • Dust extraction Optional features: • Ionizer • Diving funnels • Change part for large counts...

Production Max Output (subject to trial confirmation) Bottle Height Tablets, Capsule Diameter / Width Electrical connection Single phase Round, Oval

The vision based system provides accurate and automatic broken tablet detection. The machine can detect broken pieces as small as 0.5mm. Once a rejected tablet is detected (due to either breakage or size variation), filling of that specific container is halted and the container is immediately sent to the reject station, saving time and money. Other detection capabilities are size variations and overlapping detection. The ICU technology was developed as a technological solution rather than a mechanical one. This means that products do not need to be split into separate lines, nor fed one by one...

Automatic product setup Automatic product calibration is performed when products are placed on a specially design calibration tool, and scanned by the camera. All tablet data (size, shape, etc.) is set automatically, resulting in a very simple and accurate new product setup procedure, avoiding costly human errors. The vision-based bulk counting machine is operated through a color, touch panel PC based system. Both internal and external machine functions are controlled through a single HMI in an unmatched standard.

Gmp design with no blind spots The machine design enables the operator to observe and follow each product unit from the hopper to the bottle, significantly reducing the risk of cross contamination. Easy cleaning and changeover With the vision-based system, all contact parts are designed for tool-free release in accordance with GMP design. The fastest existing cleaning process to date is enabled by the machine’s small lightweight parts, the fact that the counting unit is separated from the track, and that contact parts regulation doesn’t apply. A spare contact part kit enables a 5 minute changeover...

When Speed & Accuracy Count DATA Detection Technologies Ltd. Park Tzora Industrial Area, Kibbutz Tzora, 9980300, Israel Tel: +972-732204444 | [email protected] | www.data-technologies.com