- Catalogs
- denis cimaf
- DAF-225E
DAF-225E
DAF-225E
- Cutting Width: 222 cm (88 in)
- Exterior Width: 254 cm (100 in) with pushbar, 140 cm (55 in) without
- Exterior Height: 139 cm (55 in) with pushbar, 98 cm (38 in) without
- Rotor Diameter: 51 cm (20 in)
- Weight: Approximately 2140 kg (4700 lbs)
- Carrier Power: Minimum 130 kW (175 hp)
- Cutting Distance from Ground: 1 cm (0.4 in)
- Optimal Material Diameter: 31 cm (12 in)
- Variable Displacement Axial Piston Motor
- Sharpenable Bolt-on Forged Blades
- Required Continuous Flow: 240 L/min (63 gal/min)
- Max Operating Pressure: 240 bar (3500 psi)
- Rotating Speed: 2500 rpm
- Motor: Variable displacement, axial-piston motors to minimize overheating and improve re-acceleration.
- Drive: Industrial cogged belt drive system to prevent slippage and reduce bearing effort.
- Knives: Heat-treated, bolt-on forged knives for maximum resistance to impact and abrasion, easily replaceable with a single nut and bolt.
- Rings: Protective rings to limit bite size and reduce knife holder breakage risks.
- Replaceable Liner: Bolt-in wear liner to extend unit lifetime by protecting the frame.
- Hydraulic Pushbar Option: Useful for directing tree falls in older growth areas.
Catalog excerpts
Achieve High Productivity and Low Costs in land clearing and vegetation control. ideal for intensive brushcutting applications mounted on wheeled or tracked skid steers or other dedicated units that are designed for use with front-mounted attachements. Industrial Land Clearing Forest Fire Prevention Road Development and Maintenance Pipelines Development and Maintenance Transmission lines
Open the catalog to page 1
SPECIFICATIONS Approximate Min. Carrier Power [kW (hp)] Cutting Width [cm (in)] Variable displacement, axial-piston motors that minimize overheating and improve re-acceleration. Industrial cogged belt drive system that prevents slippage and reduces effort applied to bearings compared with V-belts, for longer bearing life. Cutting Distance from Ground Level [cm (in)] Number of Blades on Rotor Optimal Target Material Diameter [cm (in)] HYDRAULIC SYSTEM Variable Displacement Axial Piston Motor [cc] Required Continuous Flow [L/min (gal/min)] Max. Operating Pressure [bar (psi)] Exterior Height (with...
Open the catalog to page 2
