- Catalogs
- denis cimaf
- DAH-150E
DAH-150E
DAH-150E
- New Tilt Option: Enhances productivity by increasing aggressiveness.
- Motor: Utilizes variable displacement, axial-piston motors to minimize overheating and improve re-acceleration.
- Drive System: Features an industrial cogged belt drive system that prevents slippage and reduces bearing effort, extending bearing life.
- Protective Rings: Limit bite size and reduce risks of breakage on knife holders.
- Excavator Size: 20 - 27 tons (40,000 - 54,000 lbs)
- Cutting Width: 145 cm (57 in)
- Exterior Dimensions: Length: 200 cm (79 in), Height: 112 cm (44 in), Width: 81 cm (32 in)
- Rotor Diameter: 51 cm (20 in)
- Weight: Approx. 1530 kg (3370 lbs)
- Minimum Carrier Power: 115 kW (154 hp)
- Cutting Distance from Ground Level: 2 cm (0.75 in)
- Optimal Material Diameter: 21 cm (8 in)
- Motor: Variable Displacement Axial Piston Motor
- Blades: Sharpenable, bolt-on forged blades
- Flow Requirement: Min. 1865 L/min (4100 gal/min)
- Tilt System: Standard
- Wear Liner: Bolt-on
- Operating Pressure: Max. 350 bar (5000 psi)
- Rotating Speed: 3000 rpm
- Line I.D.: Pressure: #16 (1.00 in), Return: #16 (1.00 in), Drain: #12 (0.75 in)
- Heat-treated, bolt-on forged knives provide maximum resistance to impact and abrasion.
- Easy replacement with a single nut and bolt system.
Catalog excerpts
Reach High Performances in Mulching Top-speed industrial mulching attachments for excavators and backhoes. Industrial Land Clearing Forest Fire Prevention Road Development and Maintenance Pipelines Development and Maintenance Transmission lines
Open the catalog to page 1
HYDRAULIC SYSTEM Rings Protective rings that limit the size of the bites and considerably reduce risks of breakage on the knife holders. Variable Displacement Axial Piston Motor [cc] Min. Required Continuous Flow [L/min (gal/min)] Max. Operating Pressure [bar (psi)] Rotating Speed [rpm] Pressure Line I.D. [# (in)] Return Line I.D. [# (in)] Drain Line I.D. [# (in)] OPTIONS Rotating Speed [rpm] Pressure Line I.D. [# (in)] Return Line I.D. [# (in)] Drain Line I.D. [# (in)] Type of Sharpenable Bolt-on Forged Blades Tilt System Bolt-on wear liner Approximate Weight (All Options) [kg (lbs)] New tilt...
Open the catalog to page 2
