*myagriexpo

DTN

DTN

Product catalog summary

Overview: The document describes the DTN Industrial Brushcutter-Mowers, which are designed for roadside maintenance using vertical-shaft technology on motor graders. These units allow for maintenance work to be completed up to four times faster than traditional tractor-mounted mowers due to the higher traveling speeds of graders.

Specifications: The DTN brushcutter-mowers are hydraulic attachments featuring a vertical-shaft brushcutting head mounted on an articulating arm. Key specifications include:

Easy installation and removal without needing to remove the grader blade.
High productivity, capable of replacing up to four conventional tractor-mounted mowers in certain situations.
Simple maintenance and impressive reach due to the stability of graders.

Models and Dimensions:

DTN-245: Cutting width of 244 cm (96 in), weight 3900 kg (8600 lb).
DTN-155: Cutting width of 153 cm (60 in), weight 2955 kg (6520 lb).
DTN-125: Cutting width of 123 cm (48 in), weight 2760 kg (6080 lb).

Performance: The mowers offer a maximum height reach of 730 cm (288 in), a maximum lateral reach of 853 cm (336 in), and a maximum depth reach of 173 cm (68 in) below ground level.

Contact Information: For more details, contact Denis Cimaf at 211 rue Notre-Dame, Roxton Falls QC J0H 1E0, Canada. Toll-free: 877-279-2300, Phone: 450-548-7007, Fax: 450-548-7008, Website: www.deniscimaf.com, Email: [email protected].

Catalog excerpts

INDUSTRIAL BRUSHCUTTER-MOWERS Roadside-maintenance unit Using vertical-shaft technology designed for use on motor graders Road Development and Maintenance The faster traveling speeds of graders means that roadside maintenance work can be done up to four times faster than with a mower mounted on a conventional tractor.

Open the catalog to page 1

INDUSTRIAL BRUSHCUTTER-MOWERS Hydraulic power pack DTN These industrial hydraulic attachments are a vertical-shaft brushcutting head that are mounted on an articulating arm attached to the front of a grader. Since graders are often underutilized, the DTN brushcutter-mower can be put to work on any available grader. And the faster traveling speeds of graders means that roadside maintenance work can be done up to four times faster than with a mower mounted on a conventional tractor. Maximum height reach (coupe verticale) Hydraulic power pack Maximum lateral reach (From center of the machine, horizontal...

Open the catalog to page 2

DTN

DTN

Catalog excerpts

All Denis cimaf catalogs and technical brochures