MC/TAT BELT CONVEYORS ML STORE LOADERS
12Pages

MC/TAT BELT CONVEYORS ML STORE LOADERS dewulfH enjoy growing

PRODUCT-FRIENDLY TRANSPORT AND STORAGE When it comes to transporting potatoes, Dewulf’s knowledge and experience are unrivalled. The quality of the latest generation belt conveyor has been achieved by working closely with our end users. As a result, our innovative belt conveyor and store loaders provide maximum capacity, a voluminous product flow and less risk of damage. The strength of Miedema machines lies in their simplicity, which makes them thoroughly reliable and virtually indestructible. USER FRIENDLY Since their introduction Miedema conveyors and store loaders have drawn many...

CONTROL BOX Convenient operation from either side is the defining feature of the centrally located control box. FARMER All MC conveyor models are available in a Farmer version. This is a basic version that meets the highest quality requirements, yet lacks the advanced features of the regular version. The Farmer version has two fixed belt speeds (21/42 m/min). TROUGHED CONVEYOR BELT Thanks to the troughed conveyor belt (2 x 17.5°), high capacity is obtained without the product rubbing against the sides. RECEIVING END A broad, round rubber receiving bunker ensures productfriendly filling from...

The MC 80 single belt conveyors have an 80 cm wide troughed belt with a capacity of over 130 tonnes/h at a belt speed of 40 m/min. The single belt conveyors are available with lengths of 7, 9, 10 and 12 m. Thanks to their narrow construction and the optional integrated flattening set, the conveyor belts can also be used for product inspection. The MC 80 duo belt conveyors have a high-performance 80 cm wide troughed belt and are available with lengths of 13, 17 and 20 m. The MC duo belt conveyor uses a wide, sturdy energy chain and even the basic version is a complete, fully satisfactory...

The TAT 1685 makes use of an 85 cm wide troughed conveyor belt that has a capacity of over 160 tonnes/h at a belt speed of 42 m/min. This duo belt conveyor is available with a length of 16 m. The large alloy swivel wheels make this duo belt conveyor very manoeuvrable.

PIVOT AIRE TIRES (MC DUO & TAT) The inspection lighting set provides the right lighting level at the product inspection location on the belt conveyor. If you don’t have a hard ground surface, air tyres are the solution. They allow you to move the duo belt conveyors with little effort. If desired, these can also be coupled with a steering rod. The intake height can be easily adjusted with a single lever. For easy inspection of the product, the belt conveyors can be equipped with a flattening set that evenly spreads the product across the entire width of the conveyor belt. The Motion-Package...

NODDING SECTION The store loader has a nodding section at the discharge end for filling storage buildings or trucks. A few simple mechanical hooks allow you to easily change the configuration so the end is only nodded when you choose. The small diameter of the return roller minimises the dropheight. CONVEYOR BELT The trough belt guarantees a high capacity. Because this conveyor belt runs above and free of the frame it prevents the loss of quality that would otherwise occur due to rubbing of the product against the sides. SENSORS The product detection sensors control the pivot function,...

The ML 80 store loaders have an 80 cm wide, deep troughed belt with a capacity of over 180 tonnes/h. The store loaders are available with lengths of 16, 19 or 22 metres and can be fully customised to meet your specific needs. Depending on the feature level, the machine will be equipped with one of 4 filling programs: Farmer, Comfort, Dynamic or Premium. Switching between working and transport mode is accomplished with the simple press of a button. The ML 70 series store loaders have a 70 cm wide, deep troughed belt with a high capacity of over 130 tonnes/h at a product-friendly belt speed....

WIRELESS REMOTE CONTROL (ML 80 & 70) A connection kit (for MC and TAT) connects the supplying belt conveyor to the ML, preventing product spillage. The product is always placed in the middle of the ML, regardless of the angle of incline. An additional, short, flat belt conveyor on the intake end of the ML provides additional product-friendly transport at a higher capacity (up to 15% extra at the same belt speed). X-stream can be added to a machine at any time. How you choose to fill the storage building is entirely up to you: manually controlled or fully automatic terraced filling. A...

The Farmer filling function automatically moves the store loader from side to side at a fixed speed, while the transport length and discharge height are controlled manually. With the Comfort filling function the side-to-side movement, transport length and discharge height are all controlled automatically. Starting a new terrace must be done manually. With the Comfort+ filling function the side-to-side movement, transport length and discharge height are all controlled automatically. If desired, the discharge height of the final terrace can be controlled automatically, allowing a hall to be...

Kleasterdyk 43 8831 XA Winsum The Netherlands +3 517 239 800 www.dewulfgroup.com info@dewulfgroup.com Models, versions, technical specifications, illustrations and other information in this brochure are always subject to change. Dewulf reserves the right to make changes to models, versions, technical specifications or other information at any time and without prior notice, and is under no obligation to make any such changes to previously purchased equipment.