O series
4Pages

{{requestButtons}}

Catalog excerpts

O series - 1

General Characteristics The filtration grade ranges from 4000 to 45 microns. Their anti corrosive protection includes surface treatment using phosphoric acids followed by electrostatic polyesteric paint, while other available paint and material options are also available pending request. The product is supplied with multiple couplings and flanges options availability (DIN,ASA, etc) conforminng to all required international standars. The maximum operating pressure range is 8 to 10 bars(116-145psi). They are available in other specifications, such as self cleaning version or with a cleaning brush. DROP Filtration Systems Irrigation Equipment HORIZONTAL FILTERS The O series horizontal filters are used in filtration situations where we are faced with inorganic particles such as sand in small quantities. The O series filters are used in simple filtration situations or as secondary filters in filtration systems. The main parts of this filter series are the metal body, the filter cartridge and the lid. The internal cartridge is available in different mesh densities, depending on the water contamination level. O series The filter is cleaned manually, by means of opening the drain vane at the lid, during the irrigation proccess, or for finer cleaning, the inner cartridge should be dissasembled and washed with water. There is a filter feature option where a special brush component provides surface cleaning during filtration. The component operates reciprocatively, using a manual operated handle. Furthermore, a self washing system "autoflush" can be added to the filter so that the grade of clogging can be controled and the filter can be given the order to self clean automatically.

Open the catalog to page 1
O series - 2

DROP Filtration Systems Product specification sheet: o series Irrigation EquipmentCharacteristics Product Key MT= Male Thread (BSP), M = Thread (BSP), F = Flange, G = Grooved Thread (Victaulic)

Open the catalog to page 2
O series - 3

* H = Minimum recomended installation height Note: The above weights refer to flanged version filters. http://www.drop.gr | tel.+(30) 2310 798487 | fax +(30) 2310 797484 | contact@drop.gr page 3 ►

Open the catalog to page 3
O series - 4

Product Specification Sheet: O series Filtration Systems Irrigation Equipment Note: All measurements have been taken using 120 micron screen mesh, under clean water conditions. Note: Other filter sizes are available on demand.

Open the catalog to page 4

All DROP-N. KIOSIDIS S.A. catalogs and technical brochures

  1. S series

    3 Pages

  2. D series

    2 Pages

  3. C series

    3 Pages

  4. k series

    5 Pages