S series

S series

S series

Product catalog summary
Specifications:
  • Filter models are available in sizes 2", 3", 4", and 6" with corresponding codes 05-00-050, 05-00-052, 05-00-053, and 05-00-055.
  • Connection types include M, F, and G.
  • Filtration surface area ranges from 916 cm² (142 in²) for 2" to 2948 cm² (457 in²) for 6".
  • Flow rates vary from 15-25 m³/h (66-110 gpm) for 2" to 80-150 m³/h (352-660 gpm) for 6".
  • Maximum pressure is consistent at 10 bar (145 psi) for most models, except the 4" model which can handle up to 155 psi.
Dimensions and Weight:
  • 2" model: L = 470 mm (18.5 in), A = 250 mm (9.8 in), H = 300 mm (12.0 in), Weight = 13.7 kg (30.2 lbs).
  • 3" model: L = 500 mm (19.7 in), A = 400 mm (15.7 in), H = 390 mm (15.3 in), Weight = 19.7 kg (43.4 lbs).
  • 4" model: L = 620 mm (24.4 in), A = 500 mm (19.7 in), H = 530 mm (21.0 in), Weight = 31.6 kg (69.7 lbs).
  • 6" model: L = 750 mm (29.5 in), A = 500 mm (19.7 in), H = 550 mm (21.6 in), Weight = 51.2 kg (112.8 lbs).
Filtration and Pressure Drop:
  • Hole opening sizes are 1 mm, 1.5 mm, 2 mm, and 4 mm, corresponding to filtration levels of 1000, 1500, 2000, and 4000 microns respectively.
  • Pressure drop (ΔP) is measured in PSI across various flow rates (GPM), ranging from 14.5 PSI at 4.4 GPM to 1.4 PSI at 660 GPM.
See more

Catalog excerpts

S series-1

General Characteristics The filtration grade ranges from 1000 to 4000 microns. Their anti corrosive protection includes surface treatment using phosphoric acids followed by electrostatic polyesteric paint, while other available paint and material options are also available pending request. The product is supplied with multiple couplings and flanges options availability (DIN,ASA, etc) conforminng to all required international standars. The maximum operating pressure is 10 bars (145 psi). They are available in other specifications, such as self cleaning version. DROP Filtration Systems Irrigation Equipment The S series filters are used for withholding relatively large inorganic particles such as gravel. They are reliable filters, with very low maintenance requirements. The S series filters are used for the protection hydraulic valves and flow rate measurement instruments from large inorganic particles, they have applications mainly in sprinkler systems. internal element is available in different orifice water contamination level. The main parts of this filter series are the metal body, the filter cartridge and the lid. The dimensions (micron), varied in relation with the The filter is cleaned manually, by means of opening the drain vane at the lid, during the irrigation proccess, or for finer cleaning, the inner cartridge should be dissasembled and washed with water. Furthermore, a self washing system "autoflush" can be added to the filter so that the grade of clogging can be controled and the filter can be given the order to self clean automatically. M = Thread (B.S.P), F = Flange (DIN 2576, PN10), G = Grooved Thread (Victaulic)

 Open the catalog to page 1
S series-2

ODROP Filtration Systems Product specification sheet: s series Irrigation Equipment * H = Minimum recomended installation height Note: The above weights refer to flanged version filters. Dimension Diagram http://www.drop.gr | tel.+(30) 2310 798487 | fax +(30) 2310 797484 | [email protected] page 2 ►

 Open the catalog to page 2
S series-3

Product Specification Sheet: S series S series pressure loss diagram DROP Filtration Systems Irrigation Equipment AP(PSI) Mesh data Orificewidthd(mm) Note: Other filter sizes are available on demand.

 Open the catalog to page 3
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.