APPLICATIONS The compact filtration systems KE series consist of a hydrocyclone and a screen (O, K) or disk filter. These series of systems are mainly used for the removal of large amounts of inorganic particles. They installed usually in waters from drillings or wells. MATERIALS Body: Longitudinally welded steel pipe (DIN2440, DIN2458), steel sheet (st37-2 DIN 17100). Other materials upon request. COATING Surface pre-treatment: Chemical (acid de-oxidation, phosphate). Polyester powder applied by electrostatic spraying gun. Epoxy painting upon request. The system is a complete unit which can be installed immediately to the irrigation system. When the dirty water enters into the hydrocyclone the centrifugal force causes the particles to spin at high speed onto the filter walls in a tangential direction. The particles are accumulated into the collection chamber at the bottom of the filter. The water which has been cleaned from the heavier particles passes to the outlet to be filtered of finer and lighter particles by the screen or disk filter. The system comprises also a fertilizing control head which allows to make fertilization using a fertilizing tank or a dosing pump. Cleaning The particles are accumulated to the collection chamber at the bottom of the hydrocyclone. The cleaning process can be manual with the use of a simple gate valve or automatic using an automatic cleaning kit. The screen or disk filters can be cleaned manually, removing the cartridge from the filter and by spraying with water or with the help of a bristle bush. In models which operate with brush (p&p and rotating) just open the drain valve and use the brush to clean the cartridge.