Series L - Fertilizer tanks

Product catalog summary

Technical Specifications of DROP Type Components

Dimensions and Weight

The document provides measurements and weights for various DROP types labeled L60, L90, L120, L160, L220, L220H, and L300. Key parameters include length (L), height (H), and weight in both metric and imperial units.

L60: Length 745 mm (29.3 in), Height not specified, Weight 27 kg (59.5 lbs)
L90: Length 945 mm (37.2 in), Height not specified, Weight 31 kg (68.3 lbs)
L120: Length 1115 mm (43.9 in), Height not specified, Weight 39 kg (86.0 lbs)
L160: Length 856 mm (33.7 in), Height not specified, Weight 40 kg (88.2 lbs)
L220: Length 1050 mm (41.3 in), Height not specified, Weight 62 kg (136.7 lbs)
L220H: Length 890 mm (35.0 in), Height 915 mm (12.4 in), Weight 60 kg (132.3 lbs)
L300: Length 1170 mm (46.0 in), Height 915 mm (12.4 in), Weight 64 kg (141.0 lbs)

Connection and Capacity Details

The components have vertical or horizontal configurations with 3/4" male (M) connections. Capacity and maximum pressure ratings are provided as follows:

Code	Type	Connection	Capacity (liters)	Capacity (gallons)	Max Pressure (bar)	Max Pressure (psi)
05-07-060	vertical	3/4" M	60	15.8	8	116
05-07-090	vertical	3/4" M	90	23.7	8	116
05-07-120	vertical	3/4" M	120	31.7	8	116
05-07-160	vertical	3/4" M	160	42.2	8	116
05-07-220	vertical	3/4" M	220	58.1	8	116
05-07-222	horizontal	3/4" M	220	58.1	8	116
05-07-300	horizontal	3/4" M	300	79.2	8	116

Critical Parameters and Recommendations

All components have a maximum operating pressure of 8 bar (116 psi).
Connection type is consistently 3/4" male thread, suitable for vertical or horizontal installation depending on the model.
Capacity ranges from 60 liters (15.8 gallons) to 300 liters (79.2 gallons), allowing selection based on volume requirements.
Dimensions and weights vary significantly, which should be considered for installation space and handling.

Note: Some height (H) values are missing for certain models, which may require clarification for precise installation planning.

Catalog excerpts

General Characteristics Their anti corrosive protection includes surface treatment using phosphoric acids followed by electrostatic polyesteric paint, while other available paint and material options are also available pending request. The maximum operating pressure is 8 bars (116 psi). DROP Filtration Systems Irrigation Equipment FERTILIZER TANKSL series Fertilizer tanks are a simple method for supplying fertilizer through the irrigation network. They are connected to the central manifold by means of a bypass before the screen filters, so as to avoid possible non-dilluted fertilizer particles to the Irrigation network. They are available in a stainless steel version, following demand. Dimension Diagram

Open the catalog to page 1

Product Specification Sheet: L series Flow [gpm) The time that the fertilizer in either fluid or solid state is supplied into the irrigation network depends on the solubility and the quantity of the fertilizer, as well as the flow rate of water through the fertilizer tank. The diagram above refers to a totaly soluble fertilizer.

Open the catalog to page 2