Moisture Sensor ROTARY FEED CHUTES Moisture sensor mounting chutes with rotary feed The Dryer Master rotary feed chute is an optional, extremely cost effective, configuration for mounting the outlet moisture sensor. Slide gate to close off flow Slide gate to close off flow Sensor Sensor Sampling port and viewing window Viewing Window Sample Port Rotary Feed Rotary Feed Overall 16.5" X 8.5" X 18.5" (HXWXD) (41.9 cm X 21.6 cm X 46.3 cm) Upper mounting flange 8.5” X 8.5” (21.6 cm X 21.6 cm) Motor is IP66, 25W, 115VAC single phase, 0.43FLA reversible motor with 180:1 gear reduction (230VAC also available) Slide gate to close off flow Full size viewing window Built in sampling access Rain shield Overall 18.25" X 10.25" X 18.5" (HXWXD) (46.3 cm X 26 cm X 47 cm) Inside chute 6”X6” (15.25 cm X 15.25 cm) Mounting plate is 18.25” X 10” (46.3 cm X 25.4 cm) Motor is IP66, 25W, 115VAC single phase, 0.43FLA reversible motor with 180:1 gear reduction (230VAC also available) Slide gate to close off flow Samplin

Main Product Flow Slide Gate Access Moisture Sensor Rotary Metering Device Grain Return BENEFITS • Consistent metered flow past the sensor (for corn approximately • • • BYPASS VERSION INLINE VERSION Moisture Sensor Significantly reduced chance of plugging or blockage Simplified installation with significant cost savings over DIY Built in viewing window & sampling port Grain Flow Dryer Outlet Rotary Feed 115 Ardelt Ave. Building #2, Kitchener, Ontario, Canada N2C 2E1