1. Catalogs
  2. Dynamax, Inc.
  3. SapIP-TDP Wireless TDP Sap Velocity System

SapIP-TDP Wireless TDP Sap Velocity System

SapIP-TDP Wireless TDP Sap Velocity System

Product catalog summary
Introduction
The SapIP-TDP wireless TDP sap velocity system is an advanced solution for monitoring sap flow and velocity in trees. It supports up to six TDP sap velocity probes per node, allowing for the monitoring of 2 to 3 trees per node.

System Configuration
The system enables the distribution of small SapIP-TDP nodes up to 500 meters apart, with data collection facilitated by a single wireless modem. The data is accessible via Agrisensors.NET, where it can be visualized and downloaded.

Functionality
The SapIP-TDP node can function independently or as part of a larger SapIP wireless mesh network. This network can monitor various parameters such as sap flow, sap velocity, soil moisture, weather, and leaf temperature. Up to ten nodes can connect wirelessly to a single GSM modem, with the capability to extend monitoring over a mile.

Features
  • Self-contained SapIP-TDP nodes
  • Weatherproof enclosures measuring 2.5” x 2.5” x 14”
  • Each node supports up to six TDP30 or TDP50 probes
  • Secure, password-protected data collection

Data Visualization
The AgriSensors.NET dashboard provides an intuitive interface with graphs and charts, alongside a Google Maps™ view showing node locations. Data can be exported for further analysis.

Contact Information
Dynamax Inc, 10808 Fallstone Rd #350, Houston, TX 77099 USA. Tel: 281-564-5100, Fax: 281-564-5200, Email: [email protected], Website: www.dynamax.com
See more

Catalog excerpts

SapIP-TDP Wireless TDP Sap Velocity System-1

SapIP-TDP Wireless TDP Sap Velocity System SapIP Wireless Systems – TDP Sap Velocity The new SapIP-TDP wireless TDP sap velocity system is the latest development in monitoring sap flow and sap velocity in trees. Up to (6) TDP sap velocity probes can be connected to a single SapIP node, which is enough to monitor 2 to 3 trees. This new system allows for small SapIP-TDP nodes to be distributed up to 500 meters (1600 ft) apart throughout a field, and data to be collected with a single wireless modem. Data is then displayed and graphed on a website such as Agrisensors.NET where data files can also be downloaded to your PC. The TDP data is converted to sap velocity, and if the conductive area of the trunk is known, total water use of the tree can be calculated. The SapIP-TDP node with sap velocity sensors can be used as a complete stand-alone system, or as part of a SapIP wireless mesh network, whereby plant sap flow, sap velocity, soil moisture, weather, and leaf temperature, can be monitored simultaneously all in one system. Up to (10) SapIP nodes can be connected wirelessly with a single GSM modem, and the nodes can be “daisy-chained” up to five levels deep, thus allowing for distances over a mile to be monitored. The SapIP systems are versatile and flexible, and can be configured to meet your particular requirements. • Each SapIP-TDP node is self-contained Grower Dashboard – Map View • Weatherproof Enclosures, 2.5” X 2.5” X 14” long SapIP data is displayed on the AgriSensors.NET web page “dashboard” in easy to see formats, with graphs and charts as well. There is also a Google Maps™ image which shows the location of the SapIP nodes in the field. Data files can be downloaded to your PC, and then imported into spread sheets or other data analysis software. • Each SapIP node handles up to (6) TDP30 or TDP50 probes • Up to (40) IRT Nodes on a Single Gateway Modem • Monitor 2 or 3 trees per node • Secure Data Collection, Password Protected 10808 Fallstone Rd #350 Houston, TX 77099 USA Tel: 281-564-5100 Fax: 281-564-5200 admi

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.