PUNCH-SIDE RUFF NECK LIVESTOCK TRAILER

Product catalog summary

EBY Aluminum Livestock Trailers Overview

Available Sizes:
Lengths range from 24'6" to 35'. Widths are available in 7'3", 8', and 8'6". Heights offered are 6'6", 7', and 7'6". Custom sizes can be requested.

Design and Features:
The Ruff Neck Punch-Side Gooseneck Livestock Trailer is designed for durability and customization, suitable for commercial livestock haulers, show enthusiasts, swine operators, and draft horse transporters. It is engineered for exceptional dependability.

Standard Specifications:

Floor Lengths: 24'6" to 35' (custom sizes available)
Outside Width: 7'3", 8', and 8'6"
Inside Height: 6'6", 7', and 7'6" (custom sizes available)
GVWR: 19,000 lbs with 8K axles; 25,000 lbs with (3) 8K axles or 10k axles
Axles: Rubber ride with grease-packed bearings; 102" wide with (2) 8,000# on 24'6" and 26' lengths, (2) 10,000# on 27'6" and longer lengths
Wheels: 17.5" × 6.75" heavy-duty steel, 8-lug
Tires: (4) 235/75R17.5 steel belted radials, load range H
Brakes: 12 1/4" × 3 3/8" electric on both axles; 12 1/4" × 4" on 10k axles
Safety Equipment: Two chains and electronic break-away kit
Nose: .080 aluminum smooth sheet sides and front
Coupler: 2 5/16" ball coupler (30,000# ball rating) with steel hitch post section and aluminum front gusset, adjustable height
Side Wall: .075 thick aluminum sheet riveted to extruded aluminum hat-shaped side posts on 18" centers
Punch Patterns: Standard punch patterns A, B, C, and D (custom patterns available)
Floor: .115 6061 T-6 aluminum diamond plate with (4) 1" high ridges, ridged longitudinally on 19" centers
Side Door: 28 1/2" wide, curb side escape door
Rear Door: Full-swing with (3) 4" extruded aluminum offset hinges for extended swing radius; sliding door on roadside
Roof Sheet: One-piece .040 aluminum
Partition: Divider at front of wheel wells, with outside release slam latch
Lights: LED inside and out; 12-volt D.O.T. approved

Additional Options:
Spare tire and wheel, rolling partition gate, available in a variety of colors. Refer to EBY’s Livestock Trailer Brochure for optional Trophy, Trophy Plus, and Final Drive convenience packages.

Compliance and Manufacturing:
EBY is a member of The National Association of Trailer Manufacturers, ensuring compliance with NATM guidelines. All trailers feature Dexter axles.

Catalog excerpts

PUNCH-SIDE RUFF NECK LIVESTOCK TRAILER-1

EBY ALUMINUM LIVESTOCK TRAILERS 30' Ruff Neck Punch-Side (shown with optional equipment) LIVESTOCK TRAILER EBY’s legendary top-of-the-line design Ruff Neck—our most rugged design—equips commercial livestock haulers, show enthusiasts, commercial swine operators and draft horse transporters with exceptional hauling capability. Engineered for unmatched durability, and offering an impressive level of customization, Ruff Neck sets the industry standard for delivering extraordinary dependability year after year. Available Sizes: Lengths: 24'6" to 35' Widths: 7'3", 8' and 8'6" Heights: 6'6", 7' and 7'6" Custom sizes avai

Open the catalog to page 1

PUNCH-SIDE RUFF NECK LIVESTOCK TRAILER-2

EBY ALUMINUM LIVESTOCK TRAILERS Ruff Neck Punch-Side Gooseneck Livestock Trailer Standard Features (4) 235/75R17.5 steel belted radials, load range H Safety Equipment Two chains and electronic break-away kit .080 aluminum smooth sheet sides and front 2 5 /16" Ball coupler (30,000# ball rating) with steel hitch post section and aluminum front gusset, adjustable height Side Wall .075 thick aluminum sheet riveted to extruded aluminum hat-shaped side posts on 18" centers. Posts can be notched to accept optional closure panels. Punch Patterns Standard punch patterns A, B, C and D (custom punch patterns...

Open the catalog to page 2

PUNCH-SIDE RUFF NECK LIVESTOCK TRAILER

PUNCH-SIDE RUFF NECK LIVESTOCK TRAILER

Catalog excerpts

All Eby Trailers catalogs and technical brochures